Aiwa NSX-HMT25, CX-NHMT25, NSX-HMT26 Additional Dolby PRO Logic Modes, Press Dolby PRO Logic

Page 19

PLAY WITH DOLBY PRO LOGIC

1Press VIDEO/AUX and start playback of the video

source.

“VIDEO” is displayed.

2Press DOLBY PRO LOGIC.

“NORMAL” is selected, and the playback sound has the DOLBY PRO LOGIC effect.

To cancel DOLBY PRO LOGIC mode

Press DOLBY PRO LOGIC repeatedly until “OFF” is displayed.

To change the sound levels during playback

After adjusting the balance with the noise sequencer, the sound levels of the center or each surround speaker can be adjusted during playback of laser discs or video software.

1Press MANUAL SELECT on the remote control repeatedly to select “CEN” (center speaker) or “SUR” (surround speakers).

2While the “CEN” or “SUR” is displayed, press f DOWN or g UP on the remote control to adjust the volume.

ADDITIONAL DOLBY PRO LOGIC MODES

In addition to the NORMAL mode, this unit is also equipped with the PHANTOM and the 3 STEREO modes.

PHANTOM mode: Use this mode when no center speaker is connected. The center channel signals are output through the left and right speakers.

3 STEREO mode: Use this mode when no surround speakers are connected. This mode reproduces rear sounds through the front speakers.

To select PHANTOM or 3 STEREO

Press DOLBY PRO LOGIC repeatedly until the desired DOLBY PRO LOGIC mode is displayed. The DOLBY PRO LOGIC mode is displayed cyclically as follows.

 

NORMAL

 

 

PHANTOM

 

3 STEREO

 

 

 

 

 

 

 

 

 

OFF (cancel)

 

 

 

 

 

 

 

 

 

 

To adjust the balance of connected speaker sound levels

Carry out steps 2 to 4 of “ADJUSTING SPEAKER LEVEL BALANCE”.

•Depending on the sound source and/or listening conditions, a surround effect may not be obtained even when the DOLBY PRO LOGIC is on.

•The full DOLBY PRO LOGIC effect cannot be obtained when using software without H mark.

•The DOLBY PRO LOGIC is automatically canceled when the headphones are plugged in.

DOLBY PRO LOGIC

En

ENGLISH 19

Page 18 Page 20
Image 19
Page 18 Page 20
Contents CX-NHMT25 Installation PrecautionsElectric Power Table of Contents Connect the surround speakers Before connecting the AC cordConnections Connect the front speakersConnect the AC cord to an AC outlet Positioning the SpeakersConnect the supplied antennas Connect the Television to the video equipmentConnecting AN Outdoor Antenna Remote ControlFlash Window Setting Power Economizing ModeDimmer Mode Before OperationPress Clock on the remote control Setting the ClockPress Enter or a Super T-BASS System Audio AdjustmentsVolume Graphic EqualizerPresetting Stations Manual TuningPreset Number Tuning Press c to start play Basic OperationsPlaying Discs Loading DiscsPress numbered buttons 0-9 and +10 to program Press Prgm in stop modeProgrammed Play Random /REPEAT PlayPress w REC/REC Mute to start recording Basic RecordingInserting Blank Spaces Insert the tape to be recorded on into deckTo stop dubbing Dubbing a Tape ManuallyPress Tape Deck 1/2 to select deck Press Sync DUB to start recordingInsert the tape into deck AI Edit RecordingPress w REC/REC Mute to start recording on First side To change the program of each side Programmed Edit RecordingCheck the following Press Manual Select again to stop the noise signalTo change the delay time Press Dolby PRO Logic to select NormalPress VIDEO/AUX and start playback of the video Source Additional Dolby PRO Logic ModesPress Dolby PRO Logic Prepare the source Setting the TimerAdjust the volume Press Power to turn off the powerTo check the time remaining until the power is turned off Timer RecordingTo cancel the sleep timer Press s once To start the game demo, press cwhen the power Is offPress s twice to stop the remaining two numbers Press VIDEO/AUX VIDEO/AUX JacksCD Digital OUT Optical Jack SUB Woofer JackCassette Deck Section Care and MaintenanceGeneral Tuner SectionDolby PRO Logic SpecificationsCopyright Parts Index Energía eléctrica PrecaucionesAdvertencia InstalaciónDaños que necesitan ser reparados IndiceAntena exterior MantenimientoConecte el altavoz central ConexionesConecte los altavoces delanteros Conecte los altavoces de sonido ambientalUbicacion DE LOS Altavoces Conexion DE UNA Antena Exterior Control RemotoVentanilla Parpadeante Antes DE LA OperacionActivacion DEL Modo DE Ahorro DE Energia Modo DE Intensidad DE IluminacioPara cambiar al modo de 24 horas Pulse Clock en el control remotoPulse Enter o a Para reponer el ajuste original del relojSistema Super T-BASS Control DE VolumenAjustes DE Audio Ecualizador GraficoPulse fDOWN o gUP para seleccionar una Emisora Sintonizacion ManualPreajuste DE Emisoras Sintonizacion Mediante Numero DE PreajustePulse Tape y z Push Eject para abrir el portacasete Operaciones BasicasPulse c para iniciar la reproducción Reproduccion DE Discos Introduccion DE DiscosRepita los pasos 2 y 3 para programar otras Reproduccion ALEATORIA/ Repeticion DE ReproduccionPulse Prgm en el modo de parada Programar una canciónGrabar Grabacion BasicaInsercion DE Espacios SIN Grabar Inserte la cinta que vaya a grabar en la platinaPulse Sync DUB para iniciar la grabación Pulse Tape Deck 1/2 para seleccionar la platinaPara detener el copiado Para borrar el programa de edición Grabacion CON Edicion AIInserte la cinta en la platina Para detener la grabación10 Dé la vuelta a la cinta de la platina 2 y pulse w Pulse CD EDIT/CHECK del control remoto paraPara cambiar el programa de cada cara Acerca de los canales Pulse Dolby PRO Logic para seleccionar NormalPulse de nuevo Manual Select para detener la señal de ruido Compruebe lo siguientePulse VIDEO/AUX y empiece a reproducir la Fuente de vídeo Otros Modos Dolby PRO LogicPulse Dolby PRO Logic Por temporizador Ajuste el volumenPulse Power para desconectar la alimentación Ajuste DEL TemporizadorGrabacion CON Temporizador Para cancelar el temporizador para dormirTemporizador Para reponer la demostración del juego Pulse s una vezPulse dos veces spara detener los dos números Restantes Para jugar con la demostración del juegoPulse VIDEO/AUX Haga la reproducción en el equipo conectado Tomas VIDEO/AUXToma CD Digital OUT Optical Toma SUB WooferSeccion DE LA Platina Cuidados Y MantenimientoGeneralidades Seccion DEL SintonizadorCopyright Derechos DE Autor EspecificacionesAvertissement Signification des symboles graphiquesEnergie électrique Dommage nécessitant une réparation Contrôler la chaîne et les accessoiresAntenne extérieure EntretienConnecter l’enceinte centrale ConnexionsConnecter les enceintes avant Connecter les enceintes surroundPositionnement DES Enceintes Connexion D’UNE Antenne Exterieure TelecommandeAppuyer sur ECO Mise EN Service DU Mode Economie D’ENERGIEAvant L’UTILISATION Fenêtre ClignotanteReglage DE L’HORLOGE Appuyer sur Clock tout de la télécommandeAppuyer sur Enter ou a Systeme BBE Reglages AudioEgaliseur Graphique Systeme Super T-BASSAppuyer sur f Down ou g UP pour sélectionner une station Accord ManuelMemorisation DE Stations Accord PAR Numero DE PrereglagePour mettre le compteur à Operations DE BaseAppuyer sur c pour démarrer la lecture Pour sélectionner une platine de lecturePour contrôler le temps restant Sélection d’une plage avec la télécommandeMise EN Place DE Disques Lecture DE DisquesLecture Programmee Appuyer sur Prgm en mode arrêtLecture ALEATOIRE/REPETEE Veut enregistrer Enregistrement DE BaseInsertion D’ESPACES Blancs Insérer la cassette à enregistrer dans la platineAppuyer sur Sync DUB pour démarrer l’enregistrement Appuyer sur Tape Deck 1/2 pour sélectionner La platinePour arrêter la duplication Pour contrôler l’ordre des numéros des plages programmées Insérer la cassette dans la platinePour arrêter l’enregistrement Pour effacer le programme du montagePour changer le programme de chaque face Enregistrement Avec Montage ProgrammeAu sujet des canaux Appuyer sur Dolby PRO Logic pour sélectionner NormalRégler le niveau sonore des enceintes centrale Et surround Contrôler les points suivantsAppuyer sur VIDEO/AUX et mettre la source vidéo En lecture Autres Modes Dolby PRO LogicAppuyer sur Dolby PRO Logic Préparer la source Régler le volumeAppuyer sur Power pour mettre l’appareil hors Tension Reglage DE LA MinuteriePour annuler la minuterie d’arrêt Enregistrement Commande PAR MinuteriePour désactiver la démonstration ou le jeu, appuyer sur a Appuyer une fois sur sUtilisation du jeu demo Pour réinitialiser le jeu demoPrise CD Digital OUT Optical Prises VIDEO/AUXPrise SUB Woofer Partie Magnetocassette Soins ET EntretienGeneralites Partie TunerDroits D’AUTEUR

NSX-HMT26, CX-NHMT25, NSX-HMT25 specifications

The Aiwa NSX-HMT25, CX-NHMT25, and NSX-HMT26 are solid entries in the realm of consumer audio equipment, showcasing Aiwa's commitment to quality sound and innovative technology. These compact stereo systems are designed for those who appreciate fidelity in sound without compromising on style or functionality.

One of the most notable features of these models is their robust sound output. Each system boasts a powerful amplifier that ensures clear, dynamic audio reproduction across different genres of music. Whether it’s the pulsating bass from electronic tracks or the nuanced highs of classical compositions, users can expect an impressive audio experience.

The NSX-HMT25 and NSX-HMT26 come equipped with a dual cassette deck, allowing for the convenient playback and recording of cassette tapes. This feature appeals to those who cherish the nostalgia of tape and wish to preserve their old recordings. In addition to cassette playback, both systems support CD playback, accommodating a diverse range of media formats. The CX-NHMT25 model enhances this versatility by incorporating a digital tuner, enabling access to a wide array of FM and AM radio stations.

These systems also feature advanced equalization options, allowing users to tailor sound profiles to their preferences. With preset equalizer settings and manual adjustments, audiophiles can customize sound output or select the ideal setting for different listening environments.

Another significant characteristic is the user-friendly interface, which includes an intuitive remote control. This design allows for easy navigation and control over the playback options from a distance, enhancing the overall user experience. The sleek and modern appearance of these stereo systems makes them an appealing addition to nearly any living space.

Connectivity is equally vital, and the Aiwa systems deliver in this aspect as well. They offer multiple audio input options, including auxiliary inputs for connecting external devices like smartphones or MP3 players. This ensures that users can easily integrate their personal music collections with the system.

In summary, the Aiwa NSX-HMT25, CX-NHMT25, and NSX-HMT26 stand out as versatile, high-quality audio solutions. With their solid sound performance, diverse media playback capabilities, customizable sound settings, and modern design, these stereo systems cater to both casual listeners and serious audiophiles alike, making them a noteworthy choice in home audio entertainment.
Top Page Image Contents