POSITIONING THE SPEAKERS
To achieve the optimum effects obtainable with the DOLBY PRO LOGIC system, it is important to position the speakers properly. Refer to the following illustration to find out the best location in your room.
L & R: Front speakers
C: Center speaker
Position in the center of the two front speakers. In addition, position on or below the TV set, if connecting a TV set to the unit.
SL & SR: Surround speakers
Place the surround speakers directly to the side of or slightly behind the listening area. Align them horizontally, about 1 meter (3.2 feet) above ear height.
SW: Subwoofer (For
Place the subwoofer on the floor close to a wall or in a corner of the room.
| PREPARATIONS | ||
|
|
| |
To mount the surround speakers on the wall | |||
• No sound is heard from the center and surround speakers |
| ||
| when the DOLBY PRO LOGIC is set to off. |
| |
• The center speaker sounds when the DOLBY PRO LOGIC |
| ||
| is set to on. |
|
Mount each speaker on a spot that can hold its weight.
En
4 Connect the subwoofer. (only for
6 Connect the video equipment.
Connect the subwoofer cord to SUBWOOFER terminal.
•Refer to the Operating Instractions of
Connect VIDEO/AUX jack of this unit to the audio output jack of the video equipment with an optional audio connecting cord.
5 Connect the supplied antennas.
Connect the FM antenna to FM 75 Ω terminals and the AM antenna to AM LOOP terminal.
FM antenna
AM antenna
7 Connect the Television to the video equipment.
Refer to the Operating Instructions of the connected equipment for details.
8 Connect the AC cord to an AC outlet.
•The DEMO will begin when the AC cord is plugged into an AC outlet for the first time. To deactivate the DEMO, set the clock.
•Do not leave objects generating magnetism, such as credit cards, near the speakers, as these objects may be damaged.
•Do not bring the FM antenna near metal objects or curtain rails.
•Do not bring the AM antenna near other optional equipment, the stereo system itself, the AC cord or speaker cords, since noise will be picked up.
•Do not unwind the AM antenna wire.