RADIO RECEPTION
Tuning into a station
1Press TUNER ON/BAND repeatedly to select AM or FM.
2Press TUNING +
After listening, press ■ STOP/OFF/CHARGE to turn off the radio.
For quick tuning
Keep either TUNING + (_l) or – (W) pressed for 1 or 2 seconds. When a station is tuned in to, the frequency stops automatically. However, it does not stop if the broadcast signal is weak.
For better reception + ~
FM: The headphone cord functions as the FM antenna. Keep it extended.
AM: Turn the unit to find the position which gives the best reception.
To listen to an FM stereo broadcasting
Press MONO/ST repeatedly to display STEREO.
When the FM stereo signal is weak and distorted, press
MONO/ST again. STEREO display goes out and the sound will be heard in monaural but distortion will be
reduced.
Note
●Do not open the disc compartment during radio reception. The buttons will be deactivated.
●The power is turned off automatically if no operation is made after 3 hours from the last operation during radio reception.
AM/FM steps + O
●Radio broadcasts have different frequency ranges and changes in different steps in different countries.
This unit is