Grandstream Networks GXW40XX user manual INTER-PORT Calling

Page 15

FXS Port #1: SIP UserID and Authenticate ID entered, Hunting group set to "Active"

FXS Port #2: SIP UserID and Authenticate ID left blank, Hunting Group set to "1"

FXS Port #3: SIP UserID and Authenticate ID left blank, Hunting Group set to "1"

FXS Port #4: SIP UserID and Authenticate ID entered, Hunting group set to "Active"

FXS Port #5: SIP UserID and Authenticate ID left blank, Hunting Group set to "4"

FXS Port #6: SIP UserID and Authenticate ID left blank, Hunting Group set to "4"

FXS Port #7: SIP UserID and Authenticate ID entered, Hunting group set to "Active"

FXS Port #8: SIP UserID and Authenticate ID left blank, Hunting Group set to "7"

FXS Port #24: SIP UserID and Authenticate ID left blank, Hunting Group set to "2"

Hunting Group 1 contains ports 1, 2, 3. Hunting Group 4 contains ports 4, 5, 6.

Hunting Group 7 contains ports 7, 8.

Please be aware, the choice of 1 for ports 2 and 3, the choice of 4 for ports 5 and 6, the choice 7 for port 8 is required to indicate that the SIP account tied to port market as “Active” will be used for all members of the same Hunting group. Needless to say, those members of the same Hunting group may not be sequential ports. In following example ports 3, 5 and 7 tied to SIP Account configured in Port #1 marked as “Active”, and ports 4,6,8 tied to SIP Account configured in Port #2 marked as “Active” as well.

Example of not sequential configuration of a multiple Hunting Group:

FXS Port #1: SIP UserID and Authenticate ID entered, Hunting group set to "Active"

FXS Port #2: SIP UserID and Authenticate ID entered, Hunting Group set to "Active"

FXS Port #3: SIP UserID and Authenticate ID left blank, Hunting Group set to "1"

FXS Port #4: SIP UserID and Authenticate ID left blank, Hunting group set to "2"

FXS Port #5: SIP UserID and Authenticate ID left blank, Hunting Group set to "1"

FXS Port #6: SIP UserID and Authenticate ID left blank, Hunting Group set to "2"

FXS Port #7: SIP UserID and Authenticate ID left blank, Hunting group set to "1"

FXS Port #8: SIP UserID and Authenticate ID left blank, Hunting Group set to "2"

FXS Port #24: SIP UserID and Authenticate ID left blank, Hunting Group set to "2"

Note: A single call directed to the SIP account will NOT result in all ports ringing at the same time. They will ring in the hunting group only. This feature is applicable to incoming calls only.

INTER-PORT CALLING

In some cases a user may want to make phone calls between the phones connected to multiple ports of the same gateway when it is used as a stand alone unit, without the use of a SIP server. This feature will also be applicable when the gateway is used with Hunting Groups and is registered to SIP server only with one master number. In such cases users still will be able to make inter-port calls by using the IVR feature.

For example on the GX4004 and GXW4008 the user connected to port 1 can reach the user connected to port 3 by dialing *** and 73. Digit 7 indicated using inter-port calling feature, digit 3 indicates the port number which should be reached. At the same manner the user connected to port 4 can reach the user connected to port 8 by dialing *** and 78.

Grandstream Networks, Inc.

GXW40XX User Manual

Page 15 of 38

 

Firmware 1.0.4.2

Last Updated: 06/2011

Image 15
Contents Grandstream Networks, Inc Table of Contents Diagram of GXW4004-8 and GXW4024 Back Panel Gateway GXW40XX Overview Safety ComplianceWarranty WelcomeConnect Your GXW40XX Gateway Equipment PackagingConnect the GXW40XX LAN WAN Reset Console Line FXS1 FXS24Display FXS port LEDs Status Available OFF Power LED Ready LED ConsoleLAN LED WAN LED LEDSoftware Features Overview EMC GXW4004 GXW4008 GXW4024 Hardware Specification71-78 Basic OperationsUnderstanding GXW Voice Prompts Main MenuPlacing a Phone Call Five Success Tips when using the Voice PromptCall Transfer Or Voice Prompt with option 47, then 192*168*0*160Call Hold Call WaitingWAY Conferencing Instructions for 3-way conferenceHunting Group INTER-PORT Calling Pstn Pass THROUGH/LIFE Line Sending and Receiving FAXSupport Radius Protocol Call Features From the WAN port For GXW4004/8 only Configuration GuideConfiguring GXW40XX VIA Voice Prompt From the LAN port For GXW4004/8 onlyImportant Settings NAT SettingsDtmf Methods Telnet Server End User PasswordPreferred Vocoder Codec Web PortMTZ+6MDT+5 DMZ IP FXS2 NATDND FXS1Config File Prefix Config Server PathXML Config File Password HTTP/HTTPS PasswordACS URL NTP server Lifeline ModeFailover to FXO Gateway FXO GatewayPassword Radius TimeoutConfiguration Authenticate IDMap to FXO Port# Hunting GroupPort# Offhook Auto-dialPrimary SIP Server DNS ModeUnregister on Reboot Profile ActiveOrder Disable Dtmf Enable Ring-TransferDisable Bellcore Style Proxy Only SIP T1 TimeoutRing Timeout Disable Call WaitingDisable Reminder Disable Visual MWIDial Plan Dial Plan Rules Early DialDial Plan Prefix Use # as Dial KeySDP VAD Saving the Configuration Changes Rebooting from RemoteConfiguration Through a Central Server Instructions for local firmware upgrade Software UpgradeManaging Firmware and Configuration File Download Configuration File DownloadIVR Command Restore Factory Default SettingFactory Reset Reset Button