Grandstream Networks GXW40XX Preferred Vocoder Codec, End User Password, Web Port, Telnet Server

Page 20

Preferred VOCODER (Codec)

The GXW40XX supports a broad range of voice codecs. Under Profile web pages, choose your preferred order of different codecs:

PCMU/A (or G711µ/a)

G729 A/B/E

G723

G726 (16/24/32/40)

iLBC

AAL2 (all G726)

DEFINITIONS

This section will describe the options in the Web configuration user interface. As mentioned, a user can log in as an administrator or end-user.

Functions available for the end-user are:

STATUS: Displays the network status, account status, software version and MAC-address of the phone

BASIC SETTINGS: Basic preferences such as date and time settings, multi-purpose keys and LCD settings can be set here.

Additional functions available to administrators are:

ADVANCED SETTINGS: To set advanced network settings, codec settings and XML configuration settings.

PROFILE X: To configure each of the SIP accounts.

FXS PORTS: To configure each of the FXS ports and Hunting Groups etc.

TABLE 7: BASIC SETTINGS

 

End User Password

 

Password to access the Web Configuration Menu. This field is case sensitive with a

 

 

 

 

maximum length of 25 characters.

 

 

 

 

 

 

 

 

 

 

 

 

Web Port

 

By default, HTTP uses port 80. This field is for customizable web port.

 

 

 

 

 

 

 

 

 

 

 

 

Telnet Server

 

Default is Yes.

 

 

 

 

 

 

 

 

 

 

 

 

IP Address

 

There are two modes to operate the GXW40XX :

 

 

 

 

DHCP mode: The GXW40XX acquires its IP address from the first DHCP server it

 

 

 

 

discovers from the LAN It is on.

 

 

 

 

PPoE: Set the PPPoE account settings. The GXW40XX will establish a PPPoE

 

 

 

 

session if any of the PPPoE fields is set.

 

 

 

 

Static IP mode: configure the IP address, Subnet Mask, Default Router IP

 

 

 

 

address, DNS Server 1 (primary), DNS Server 2 (secondary) fields. These fields are

 

 

 

 

set to zero by default.

 

 

 

 

 

 

Grandstream Networks, Inc.

GXW40XX User Manual

Page 20 of 38

 

Firmware 1.0.4.2

Last Updated: 06/2011

Image 20
Contents Grandstream Networks, Inc Table of Contents Diagram of GXW4004-8 and GXW4024 Back Panel Safety Compliance WarrantyWelcome Gateway GXW40XX OverviewConnect the GXW40XX Connect Your GXW40XX GatewayEquipment Packaging Display FXS port LEDs Status LAN WAN Reset Console LineFXS1 FXS24 Power LED Ready LED Console LAN LED WAN LEDLED Available OFFSoftware Features Overview EMC Hardware Specification GXW4004 GXW4008 GXW4024Basic Operations Understanding GXW Voice PromptsMain Menu 71-78Five Success Tips when using the Voice Prompt Placing a Phone CallOr Voice Prompt with option 47, then 192*168*0*160 Call HoldCall Waiting Call TransferHunting Group WAY ConferencingInstructions for 3-way conference INTER-PORT Calling Support Radius Protocol Pstn Pass THROUGH/LIFE LineSending and Receiving FAX Call Features Configuration Guide Configuring GXW40XX VIA Voice PromptFrom the LAN port For GXW4004/8 only From the WAN port For GXW4004/8 onlyDtmf Methods Important SettingsNAT Settings End User Password Preferred Vocoder CodecWeb Port Telnet ServerMTZ+6MDT+5 DMZ IP NAT DNDFXS1 FXS2Config Server Path XML Config File PasswordHTTP/HTTPS Password Config File PrefixACS URL Lifeline Mode Failover to FXO GatewayFXO Gateway NTP serverRadius Timeout ConfigurationAuthenticate ID PasswordHunting Group Port#Offhook Auto-dial Map to FXO Port#DNS Mode Unregister on RebootProfile Active Primary SIP ServerEnable Ring-Transfer Disable Bellcore StyleProxy Only SIP T1 Timeout Order Disable DtmfDisable Call Waiting Disable ReminderDisable Visual MWI Ring TimeoutEarly Dial Dial Plan PrefixUse # as Dial Key Dial Plan Dial Plan RulesSDP VAD Configuration Through a Central Server Saving the Configuration ChangesRebooting from Remote Software Upgrade Instructions for local firmware upgradeConfiguration File Download Managing Firmware and Configuration File DownloadRestore Factory Default Setting Factory ResetReset Button IVR Command