Grandstream Networks GXW40XX Power LED Ready LED Console, Lan Led Wan Led, Available OFF

Page 7

Power LED

Ready LED

Console

LAN LED

WAN LED

LED 1–24

Indicates Power. Remains ON when Power is connected and turned ON.

Remains ON after boot-up.

Turns ON when Console port is being used.

Indicates LAN (or WAN) port activity

Indicates PC (or LAN) port activity

Indicate status of the respective FXS Ports on the back panel Busy - ON (Solid Green)

Available - OFF

Slow blinking FXS LEDs indicates Voice Mail for that port.

NOTE:

All LED lights display green when ON.

Slow blinking of READY, WAN and LAN LED together indicates a firmware upgrade or provisioning state.

LED POWER, READY and WAN lights are ON when device is up and running and successfully registered to the SIP Server.

Slow blinking of READY LED indicates that device has not registered with any SIP Service provider.

Grandstream Networks, Inc.	GXW40XX User Manual	Page 7 of 38
	Firmware 1.0.4.2	Last Updated: 06/2011

Image 7

Contents Grandstream Networks, Inc Table of Contents Diagram of GXW4004-8 and GXW4024 Back Panel Gateway GXW40XX Overview Safety ComplianceWarranty WelcomeEquipment Packaging Connect Your GXW40XX GatewayConnect the GXW40XX FXS1 FXS24 LAN WAN Reset Console LineDisplay FXS port LEDs Status Available OFF Power LED Ready LED ConsoleLAN LED WAN LED LEDSoftware Features Overview EMC GXW4004 GXW4008 GXW4024 Hardware Specification71-78 Basic OperationsUnderstanding GXW Voice Prompts Main MenuPlacing a Phone Call Five Success Tips when using the Voice PromptCall Transfer Or Voice Prompt with option 47, then 192*168*0*160Call Hold Call WaitingInstructions for 3-way conference WAY ConferencingHunting Group INTER-PORT Calling Sending and Receiving FAX Pstn Pass THROUGH/LIFE LineSupport Radius Protocol Call Features From the WAN port For GXW4004/8 only Configuration GuideConfiguring GXW40XX VIA Voice Prompt From the LAN port For GXW4004/8 onlyNAT Settings Important SettingsDtmf Methods Telnet Server End User PasswordPreferred Vocoder Codec Web PortMTZ+6MDT+5 DMZ IP FXS2 NATDND FXS1Config File Prefix Config Server PathXML Config File Password HTTP/HTTPS PasswordACS URL NTP server Lifeline ModeFailover to FXO Gateway FXO GatewayPassword Radius TimeoutConfiguration Authenticate IDMap to FXO Port# Hunting GroupPort# Offhook Auto-dialPrimary SIP Server DNS ModeUnregister on Reboot Profile ActiveOrder Disable Dtmf Enable Ring-TransferDisable Bellcore Style Proxy Only SIP T1 TimeoutRing Timeout Disable Call WaitingDisable Reminder Disable Visual MWIDial Plan Dial Plan Rules Early DialDial Plan Prefix Use # as Dial KeySDP VAD Rebooting from Remote Saving the Configuration ChangesConfiguration Through a Central Server Instructions for local firmware upgrade Software UpgradeManaging Firmware and Configuration File Download Configuration File DownloadIVR Command Restore Factory Default SettingFactory Reset Reset Button