Grandstream Networks GXW40XX user manual Acs Url

Page 25

 

 

 

 

 

 

Firmware Key

 

For firmware encryption. It should be 32-digit in Hexadecimal Representation. End

 

 

 

 

 

 

 

user should keep it blank.

 

 

 

 

 

 

 

 

 

 

 

 

SSL Certificate

 

The GXW40XX series supports SIP over TLS. It has built-in private key and SSL

 

 

 

 

certificate. The user specified SSL certificate used for SIP over TLS is in X.509

 

 

 

 

format.

 

 

 

 

 

 

 

 

 

 

 

 

SSL Private Key

 

You may also customize the SSL Private Key. The user specified SSL private key

 

 

 

 

used for SIP over TLS is in X.509 format.

 

 

 

 

 

 

 

 

 

 

 

 

SSL Private Key Password

 

Enter SSL Private Key password here.

 

 

 

 

 

 

 

 

 

 

 

 

ACS URL

 

User specify the Auto Configuration Server’s URL (TR-069 protocol)

 

 

 

 

 

 

 

 

 

 

 

 

ACS Username

 

User specify the ACS Username

 

 

 

 

 

 

 

 

 

 

 

 

ACS Password

 

User specify the ACS password

 

 

 

 

 

 

 

 

 

 

 

 

Periodic Inform Enable

 

Default is No. If set to YES, device will send inform packets to the ACS

 

 

 

 

 

 

 

 

 

 

 

 

Periodic Inform Interval

 

Frequency that the inform packets will be sent out to the ACS

 

 

 

 

 

 

 

 

 

 

 

 

Connection Request

 

Set a user name for the ACS to connect to this device

 

 

Username

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Connection Request

 

Set a password for the ACS to connect to this device

 

 

Password

 

 

 

 

 

 

 

 

 

 

 

 

 

 

System Ring Cadence

 

Configuration option for all FXS ports ring cadence for all incoming calls.

 

 

 

 

(Syntax: c=on1/off1-on2/off2-on3/off3; [...]) Default is set to c=2000/4000; (US

 

 

 

 

standards)

 

 

 

 

 

 

 

 

 

 

 

 

Call Progress Tones

 

Using these settings, user can configure tone frequencies according to user

 

 

 

 

preference. By default, the tones are set to North American frequencies.

 

 

 

 

Frequencies should be configured with known values to avoid uncomfortable high

 

 

 

 

pitch sounds. ONis the period of ringing (ON time in ms) while OFF is the period of

 

 

 

 

silence. In order to set a continuous ring, OFF should be zero. Otherwise it will ring

 

 

 

 

ON ms and a pause of OFF ms and then repeat the pattern.

 

 

 

 

• “Dial tone”

 

 

 

 

• “Ringback tone”

 

 

 

 

“Busy/Re-order tone”

 

 

 

 

• “Confirmation tone”

 

 

 

 

Please refer the document below to determine your local call progress tones:

 

 

 

 

http://www.itu.int/ITU-T/inr/forms/files/tones-0203.pdf

 

 

 

 

 

 

 

 

 

 

 

 

Lock Keypad Update

 

If set to “Yes”, the configuration update via keypad is disabled.

 

 

 

 

 

 

 

 

 

 

 

 

Disable Voice Prompt

 

Disables the voice prompt configuration. Default is “No”. If set to “Yes” accessing

 

 

 

 

integrated voice menu will be impossible.

 

 

 

 

 

 

 

 

 

 

 

 

Disable Direct IP Call

 

Disables the Direct IP Call function. Default is “No”. If set to “Yes” direct IP-to-IP

 

 

 

 

calling will not be supported.

 

 

 

 

 

 

Grandstream Networks, Inc.

GXW40XX User Manual

Page 25 of 38

 

Firmware 1.0.4.2

Last Updated: 06/2011

Image 25
Contents Grandstream Networks, Inc Table of Contents Diagram of GXW4004-8 and GXW4024 Back Panel Warranty Safety ComplianceWelcome Gateway GXW40XX OverviewEquipment Packaging Connect Your GXW40XX GatewayConnect the GXW40XX FXS1 FXS24 LAN WAN Reset Console LineDisplay FXS port LEDs Status LAN LED WAN LED Power LED Ready LED ConsoleLED Available OFFSoftware Features Overview EMC GXW4004 GXW4008 GXW4024 Hardware SpecificationUnderstanding GXW Voice Prompts Basic OperationsMain Menu 71-78Placing a Phone Call Five Success Tips when using the Voice PromptCall Hold Or Voice Prompt with option 47, then 192*168*0*160Call Waiting Call TransferInstructions for 3-way conference WAY ConferencingHunting Group INTER-PORT Calling Sending and Receiving FAX Pstn Pass THROUGH/LIFE LineSupport Radius Protocol Call Features Configuring GXW40XX VIA Voice Prompt Configuration GuideFrom the LAN port For GXW4004/8 only From the WAN port For GXW4004/8 onlyNAT Settings Important SettingsDtmf Methods Preferred Vocoder Codec End User PasswordWeb Port Telnet ServerMTZ+6MDT+5 DMZ IP DND NATFXS1 FXS2XML Config File Password Config Server PathHTTP/HTTPS Password Config File PrefixACS URL Failover to FXO Gateway Lifeline ModeFXO Gateway NTP serverConfiguration Radius TimeoutAuthenticate ID PasswordPort# Hunting GroupOffhook Auto-dial Map to FXO Port#Unregister on Reboot DNS ModeProfile Active Primary SIP ServerDisable Bellcore Style Enable Ring-TransferProxy Only SIP T1 Timeout Order Disable DtmfDisable Reminder Disable Call WaitingDisable Visual MWI Ring TimeoutDial Plan Prefix Early DialUse # as Dial Key Dial Plan Dial Plan RulesSDP VAD Rebooting from Remote Saving the Configuration ChangesConfiguration Through a Central Server Instructions for local firmware upgrade Software UpgradeManaging Firmware and Configuration File Download Configuration File DownloadFactory Reset Restore Factory Default SettingReset Button IVR Command