Grandstream Networks GXW40XX user manual Nat, Dnd, FXS1, FXS3, FXS24

Page 23

 

 

 

 

 

 

 

 

 

 

 

 

 

 

PPPoE Link Up

 

 

 

 

 

 

 

 

 

 

 

 

 

Shows whether the PPPoE connection is running if connected to DSL modem.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

NAT

 

Shows type of NAT the GXW40XX is connected to via its WAN port. It is based on

 

 

 

 

 

 

 

STUN protocol.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Port Status

 

Displays relevant information regarding the individual FXS ports. Example:

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Port

Hook

Registration

 

DND

Forward

Busy

 

Delayed

 

 

 

 

 

 

 

 

 

 

Forward

 

Forward

 

 

 

 

FXS1

On Hook

Registered

 

No

613

 

 

 

 

 

 

 

FXS2

Off Hook

Registered

 

No

 

614

 

 

 

 

 

 

FXS3

On Hook

Not

 

No

 

 

 

 

 

 

 

 

 

 

Registered

 

 

 

 

 

 

 

 

 

 

FXS24

On Hook

Registered

 

Yes

 

 

 

615

 

 

 

 

** FXS port 24 user has set Do Not Disturb.

 

 

 

 

 

 

 

 

 

FXS port 1 user has set his calls to be forwarded unconditionally to ext 613

 

 

 

 

 

FXS port 2 user has set his calls to be forwarded to 614 when his phone is busy.

 

 

 

 

FXS port 3 user is not registered with his SIP Server.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Advanced User configuration includes not only the end user configuration, but also advanced configurations such as: SIP configuration, Codec selection, NAT Traversal Setting and other miscellaneous configuration.

Table 9: ADVANCED SETTINGS

 

Admin Password

 

Administrator password. Only the administrator can configure the “Advanced

 

 

 

 

Settings” page. Password field is purposely left blank for security reasons after

 

 

 

 

clicking update and saved. The maximum password length is 25 characters.

 

 

 

 

 

 

 

 

 

 

 

 

Layer 3 QoS

 

This field defines the layer 3 QoS parameter which can be the value used for IP

 

 

 

 

Precedence or Diff-Serv or MPLS. Default value is 48.

 

 

 

 

 

 

 

 

 

 

 

 

Layer 2 QoS

 

Value used for layer 2 VLAN tag. Default setting is blank.

 

 

 

 

 

 

 

 

 

 

 

 

STUN Server

 

IP address or Domain name of the STUN server.

 

 

 

 

STUN server assists devices behind a NAT firewall or a router to set up calls via

 

 

 

 

VoIP.

 

 

 

 

STUN server is often provided by the VoIP service provider or a public STUN server

 

 

 

 

can be used. For a sample list of public free STUN servers please refer to:

 

 

 

 

http://www.voip-info.org/wiki-STUN

 

 

 

 

 

 

 

 

 

 

 

 

Keep-alive interval

 

This parameter specifies the number of seconds after which a new blank UDP

 

 

 

 

packet will be sent out to the proxy/server port in order to have the port stay open

 

 

 

 

and the device remain reachable. Default is 20 seconds.

 

 

 

 

 

 

 

 

 

 

 

 

Use STUN to detect

 

Use STUN keep-alive to detect WAN side network problems. If keep-alive request

 

 

network connectivity

 

does

 

 

 

 

not yield any response for configured number of times, the device will restart the

 

 

 

 

TCP/IP

 

 

 

 

stack. If the STUN server does not respond when the device boots up, the

 

 

 

 

feature is

 

 

 

 

disabled.

 

 

 

 

 

 

 

 

 

 

 

 

Firmware Upgrade &

 

Enables GXW40XX to download firmware or configuration file using either the TFTP

 

 

Provisioning

 

or HTTP/S protocols.

 

 

 

 

 

 

Grandstream Networks, Inc.

GXW40XX User Manual

Page 23 of 38

 

Firmware 1.0.4.2

Last Updated: 06/2011

Image 23
Contents Grandstream Networks, Inc Table of Contents Diagram of GXW4004-8 and GXW4024 Back Panel Gateway GXW40XX Overview Safety ComplianceWarranty WelcomeConnect the GXW40XX Connect Your GXW40XX GatewayEquipment Packaging Display FXS port LEDs Status LAN WAN Reset Console LineFXS1 FXS24 Available OFF Power LED Ready LED ConsoleLAN LED WAN LED LEDSoftware Features Overview EMC GXW4004 GXW4008 GXW4024 Hardware Specification71-78 Basic OperationsUnderstanding GXW Voice Prompts Main MenuPlacing a Phone Call Five Success Tips when using the Voice PromptCall Transfer Or Voice Prompt with option 47, then 192*168*0*160Call Hold Call WaitingHunting Group WAY ConferencingInstructions for 3-way conference INTER-PORT Calling Support Radius Protocol Pstn Pass THROUGH/LIFE LineSending and Receiving FAX Call Features From the WAN port For GXW4004/8 only Configuration GuideConfiguring GXW40XX VIA Voice Prompt From the LAN port For GXW4004/8 onlyDtmf Methods Important SettingsNAT Settings Telnet Server End User PasswordPreferred Vocoder Codec Web PortMTZ+6MDT+5 DMZ IP FXS2 NATDND FXS1Config File Prefix Config Server PathXML Config File Password HTTP/HTTPS PasswordACS URL NTP server Lifeline ModeFailover to FXO Gateway FXO GatewayPassword Radius TimeoutConfiguration Authenticate IDMap to FXO Port# Hunting GroupPort# Offhook Auto-dialPrimary SIP Server DNS ModeUnregister on Reboot Profile ActiveOrder Disable Dtmf Enable Ring-TransferDisable Bellcore Style Proxy Only SIP T1 TimeoutRing Timeout Disable Call WaitingDisable Reminder Disable Visual MWIDial Plan Dial Plan Rules Early DialDial Plan Prefix Use # as Dial KeySDP VAD Configuration Through a Central Server Saving the Configuration ChangesRebooting from Remote Instructions for local firmware upgrade Software UpgradeManaging Firmware and Configuration File Download Configuration File DownloadIVR Command Restore Factory Default SettingFactory Reset Reset Button