Sony SRX- R110, SRX-R105 Screen Control window, File menu, Back menu, Password menu, Help menu

Page 10

Chapter 1 Overview

aMenu bar

File menu

Selecting “Quit” from the File menu exits the SRX Controller.

Back menu

Click to return to the Browser Screen window of the SRX Controller.

Password menu

Use to set the authentication passwords required for displaying the SETTING window and the SERVICE window. The Password menu can be displayed only when an authorized administrator starts the SRX Controller on the computer for controlling the projector.

For details on the SETTING window and the SERVICE window, refer to the Installation Manual for Dealers.

Help menu

Shows the version and serial number of the SRX Controller.

bSCREEN CONTROL window

For details, see “SCREEN CONTROL window” on page 10.

cInformation window

message is displayed in the STATUS MESSAGE window on the left side of the projector.

dPOWER ON/STANDBY (?/1) buttons and

POWER indicator

Click ON to turn on the lamp. The indicator lights green. Clicking STANDBY opens the confirmation dialog. Clicking “OK” makes the projector enter standby mode. The indicator flashes green. Even in standby mode, the fans continue to run to reduce internal heat. When the fans stop running, the indicator lights red.

eFUNCTION 1/2/3 radio buttons

Register the data set or adjusted with “Signal Adjust” in the PICTURE CONTROL window and “Color” in the COLOR/FRAME window. You can recall it later to project the image with that setting.

For details, see “To register the settings that have been adjusted” on page 25.

fWindow select buttons

Open the window with the items you want to set or adjust.

gAdjustment/setting window

Clicking the window select button switches the window for the adjustment and setting.

The “PICTURE CONTROL,” “COLOR/FRAME” and “INSTALLATION” windows can be displayed.

For details on each window, see “Adjustments and Settings Using the SRX Controller” on page 25.

SCREEN CONTROL window

1

2

3

4

5

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Location: Shows the location where the projector is installed, as set in the SETTING window at the time of installation.

Name: Shows the name of the projector that was set in the SETTING window at the time of installation.

Operation Timer: Shows the operation hours of the projector.

Lamp A/Lamp B: Shows an approximate percentage to indicate the time used before the recommended time for replacement of each projection lamp (i.e. 100% indicates the time for replacement). The indicator on the left lights when the corresponding lamp turns on. It does not light when the corresponding lamp turns off.

Warning Info: Displays an error message if there is any warning information on the projector. The same

aScreen mode buttons

Select single-, dual- or quad-screen mode for multiple

display mode. Click for single, for dual and for quad mode.

bCUT OFF “ON/OFF” buttons

Click the ON button to cut off the picture momentarily. Click the OFF button to restore the picture.

The SCREEN CONTROL window changes depending on the screen mode selected with the screen mode button (1). When dual- or quad-screen mode is selected, the buttons function independently on each divided screen.

GB 10

Location and Function of Controls

Page 9 Page 11
Image 10
Page 9 Page 11
Contents SR Projector Pour les utilisateurs en Europe For the customers in the USAFor the customers in Europe Für Kunden in EuropaTable of Contents Projecting OthersOn installation PrecautionsOn safety On illuminationCD-ROM System Requirements Using the CD-ROM ManualOn cleaning Reading the CD-ROM ManualHigh Brightness, High Picture Quality FeaturesFlexible and Reliable System Location and Function of Controls Versatile SetupVarious signal input Optional lensLeft Side/Rear Control Function Menu WindowFile menu Password menuScreen Control window Back menuRemote Commander 11 GBScreen SEL buttons To install batteriesLens Cont buttons Unsuitable Installation Precautions on Installation13 GB Unsuitable Conditions Using the Carrying HandlesUsing the Adjusters Blocking the ventilation holesSystem Requirements Installing the ProjectorInstalling the SRX Controller 15 GBPreparations Connecting the Computer via the RS-232C Connecting the Computer via the Ethernet17 GB Starting the SRX Controller Changing the Connection ModeStarting the SRX Controller About the Browser ScreenWhen you connect the projector, make sure to Connecting the ProjectorConnecting with HD-SDI Equipment 19 GBConnecting with a Computer Projecting the Picture Using the Remote Commander21 GB When you select dual-screen mode or quad-screen mode in step Using the Computer for Controlling the Projector 23 GBTo cut off the picture To turn off the powerTo cut off the whole screen 25 GB To reset the settings that have been adjustedTo register the settings that have been adjusted To go back to the Browser ScreenPicture Control Window Signal Info InformationAbout the items that cannot be adjusted Input SourceColor Signal AdjustCOLOR/FRAME Window 27 GBInstallation Window Frame AdjustManual Lamp Select Mode Auto Lamp Select Mode29 GB Signal Adjust Input Signals And Adjustable/Setting ItemsFrame Adjust Lamp Life 31 GBRemote Commander/SRX Controller TroubleshootingPower PictureError Messages 33 GBRear FAN Alert Specifications 35 GBPreset Signals Optional accessoriesPin assignment Displayed image size in multiple screen mode 37 GBLamp Power Lamp Select Lens Control Index
Top Page Image Contents