Preparations
Precautions on
Installation
Unsuitable Installation
Do not install the projector in the following situations. Such installations may cause a malfunction or damage to the projector.
Poorly ventilated
Chapter 2
activating the protection circuit. Be sure not to block the ventilation holes for exhaust. Leave a space of more than 1 m (39 3/8 inches) around the unit.
Extremely hot and humid
Chapter 2 Preparations
Location subject to sudden change of temperature
The projector is equipped with ventilation holes for intake and exhaust to prevent internal heat
Situation that may block the ventilation holes for exhaust
If you put something beside the ventilation holes for exhaust on the side or rear of the projector, the exhaust may be inhaled into the projector through the ventilation holes for intake, causing internal heat
A sudden change of temperature may produce moisture condensation, causing damage to the projector. Take care with heaters or
Very dusty
Precautions on Installation