Sony SRX- R110, SRX-R105 Unsuitable Conditions, Using the Carrying Handles, Using the Adjusters

Page 14

Chapter 2 Preparations

Unsuitable Conditions

Do not use the projector under the following conditions.

Laying the unit on its side or upside down

Tilting the unit to the right or left

±10°

Avoid tilting the projector more than ± 10 degrees, and avoid installing it in place other than a floor. Doing so may cause color shading or shorten the lamp life excessively.

Blocking the ventilation holes

Installation

Using the Carrying Handles

Use the front and rear carrying handles to carry the projector.

Caution

To avoid injury, have at least four people carry the projector using the front and rear handles.

Using the Adjusters

Avoid using a thick-piled carpet or anything that covers the ventilation holes (exhaust/intake). Otherwise, internal heat may build up.

For the locations of the ventilation holes (exhaust/intake), see “Location and Function of Controls” on page 8.

When the projector installation location is not horizontal, rotate the adjusters using a spanner so that the projector is placed horizontally. There are an adjuster on the right and one on the left.

Spanner

GB 14

Installation

Image 14
Contents SR Projector Pour les utilisateurs en Europe For the customers in the USAFor the customers in Europe Für Kunden in EuropaTable of Contents Projecting OthersOn installation PrecautionsOn safety On illuminationCD-ROM System Requirements Using the CD-ROM ManualOn cleaning Reading the CD-ROM ManualFlexible and Reliable System FeaturesHigh Brightness, High Picture Quality Location and Function of Controls Versatile SetupVarious signal input Optional lensLeft Side/Rear Control Function Menu WindowFile menu Password menuScreen Control window Back menuRemote Commander 11 GBLens Cont buttons To install batteriesScreen SEL buttons 13 GB Precautions on InstallationUnsuitable Installation Unsuitable Conditions Using the Carrying HandlesUsing the Adjusters Blocking the ventilation holesSystem Requirements Installing the ProjectorInstalling the SRX Controller 15 GBPreparations 17 GB Connecting the Computer via the EthernetConnecting the Computer via the RS-232C Starting the SRX Controller Changing the Connection ModeStarting the SRX Controller About the Browser ScreenWhen you connect the projector, make sure to Connecting the ProjectorConnecting with HD-SDI Equipment 19 GBConnecting with a Computer 21 GB Using the Remote CommanderProjecting the Picture When you select dual-screen mode or quad-screen mode in step Using the Computer for Controlling the Projector 23 GBTo cut off the whole screen To turn off the powerTo cut off the picture 25 GB To reset the settings that have been adjustedTo register the settings that have been adjusted To go back to the Browser ScreenPicture Control Window Signal Info InformationAbout the items that cannot be adjusted Input SourceColor Signal AdjustCOLOR/FRAME Window 27 GBInstallation Window Frame Adjust29 GB Auto Lamp Select ModeManual Lamp Select Mode Frame Adjust Input Signals And Adjustable/Setting ItemsSignal Adjust Lamp Life 31 GBRemote Commander/SRX Controller TroubleshootingPower PictureError Messages 33 GBRear FAN Alert Specifications 35 GBPin assignment Optional accessoriesPreset Signals Displayed image size in multiple screen mode 37 GBLamp Power Lamp Select Lens Control Index