Sony SRX-R105 Features, High Brightness, High Picture Quality, Flexible and Reliable System

Notes

•If you lose the CD-ROM disc or become unable to read its content, for example because of a hardware failure, you can do one of the following.

-You can purchase a new CD-ROM disc to replace one that has been lost or damaged. Contact your Sony service representative.

-You can purchase printed versions of the Operating Instructions (English version). Contact your Sony service representative.

When ordering, be sure to specify the part number of the manual you want.

Part number Models covered 3-869-836-01 SRX-R110/R105

•Intel and Pentium are registered trademarks of Intel Corporation or its subsidiaries in the United States and other countries.

•Microsoft and Windows are registered trademarks of Microsoft Corporation in the United States and/or other countries.

•Adobe, Acrobat, and Adobe Reader are trademarks of Adobe Systems Incorporated in the United States and/or other countries.

Features

High Brightness, High Picture Quality

High brightness

The SRX-R110 uses two 2kW Xenon lamps as a light source, and the SRX-R105 uses two 1kW Xenon lamps. These compact-size Xenon lamps provide high brightness of 10,000 ANSI lumens for the SRX-R110 and 5,000 ANSI lumens for the SRX-R105, assuring excellent uniformity on the entire screen.

High resolution

Sony’s new, unique three SXRD™ (Silicon X-tal Reflective Display) panels with approximately 8,850,000 pixels realizes a high-resolution of 4096 × 2160 dots. The resolution corresponds to four times that of an HDTV image and meets the “4K” quality resolution level of Digital Cinema.

Multi-screen mode

The high resolution of the projector enables single-, dual- and quad-mode projection in which full HD images can be displayed even in each of two or four divided screens.

Images from different input sources can be displayed in these divided screens simultaneously.

High contrast ratio

The combination of the SXRD imaging devices and 3PBS optical devices offers a high contrast ratio of more than 1800:1.

Gamma correction circuit

Three types of gamma correction circuit, 1.8, 2.2 and 2.6, are selectable according to the signal input, allowing projection of an image with optimum brightness.

Color space feature

The projector supports three standards of color tonal reproduction range, DCDM, 709 and CIEXYZ, allowing you to obtain an image with precise color reproduction according to the input sources.

Flexible and Reliable System

Dual lamp system

The projector adopts a dual lamp system for versatility of use. You can select dual-lamp or single-lamp mode, and can reduce each lamp’s power output. These modes allow you to save power and increase lamp life.

Also, if one bulb burns out, the other keeps projecting images.

Chapter 1 Overview

Features

7GB