Specifications
Optical characteristics
Projection system
| SXRD (Silicon X-tal Reflective Display) |
| 3 panel prism color integration system |
SXRD | 8,847,360 pixels (4098 × 2160 × 3) |
Lens | Optional |
Light output | SRX-R110: 10,000 ANSI1) lm ± 10% |
| (factory preset value) |
| SRX-R105: 5,000 ANSI1) lm ± 10% |
| (factory preset value) |
Lamp | SRX-R110: 2 kW Xenon lamp × 2 |
| SRX-R105: 1 kW Xenon lamp × 2 |
1)ANSI lumen is a measuring method of American National Standard IT 7.228.
Electrical characteristics
Acceptable signal
Component, XGA, SXGA, WXGA, HD (when the LKRI-001 analog input board is installed)
HD-SDI (SMPTE Serial Digital Interface standard) (when the LKRI-002 HD- SDI (4:2:2) input board is installed)
Input/Output
INTER LOCK | Minijack |
| Normal operation at short circuit |
| Lamp power off at open circuit |
RS232C | D-sub 9-pin (female) (For details, see |
| “Pin assignment” on page 36.) |
ETHERNET | 10BASE-T/100BASE-TX |
Input signal
When the LKRI-001 is installed
Analog RGB/component: BNC type R/R-Y: 0.7 Vp-p ±2 dB positive, 75 ohms terminated
G/G SYNC: 0.7 Vp-p ±2 dB positive, 75 ohms terminated
Gwith sync/Y: 1 Vp-p ±2 dB sync negative, 75 ohms terminated B/B-Y: 0.7 Vp-p ±2 dB positive, 75 ohms terminated
SYNC/HD: Composite sync: 0.6 – 8 Vp-p, high impedance, sync positive/ negative
Horizontal sync: 0.6 – 8 Vp-p, high impedance, sync positive/negative VD: Vertical sync: 0.6 – 8 Vp-p, high impedance, sync positive/negative
HDTV (YPbPr): BNC type
Y:1 Vp-p ± 2 dB positive, 75 ohms terminated
Tri-level sync: ± 0.3 Vp-p
Bi-level sync: 0.3 Vp-p
Pb/Pr: 0.35 Vp-p ± 2 dB positive, 75 ohms terminated
HDTV (GBR): BNC type
G with sync: 1 Vp-p ± 2 dB, 75 ohms terminated
Tri-level sync: ± 0.3 Vp-p
Bi-level sync: 0.3 Vp-p
B/R (GBR): 0.7 Vp-p ± 2 dB positive, 75 ohms terminated
When the LKRI-002 is installed SMPTE format HD
General
Dimensions
740 × 500 × 1320 mm (29 1/4 × 19 3/4 × 52 inches) (w/h/d)
MassApprox. 110 kg (242 lb 8 oz) (excluding
the optional lens)
Power requirements
SRX-R110: 200 to 240 V AC, 50/60 Hz
SRX-R105: 100 to 240 V AC, 50/60 Hz Power consumption
SRX-R110: Max. approx. 5.4 kW (Standby mode: 40 W)
SRX-R105: Max. approx. 3.0 kW (Standby mode: 40 W)
Current consumption
SRX-R110: 30 to 22 A
SRX-R105: 30 to 12.5 A Operating temperature
5°C to 35°C (41°F to 95°F) (About 20 minutes of aging is recommended to provide better quality picture.)
Performance guarantee temperature
10°C to 30°C (50°F to 86°F) Operating humidity
35% to 85%
Storage temperature
–20°C to + 60°C (–4°F to +140°F) Storage humidity
10% to 90%
Supplied accessories
Remote Commander RM-PJ4K (1) Size AA (R6) batteries (2)
SRX Controller (CD-ROM) (1) Ethernet cable (cross cable manufactured
by Sony: 1-830-803-11) (1) Operating Instructions (1) Installation Manual for Dealers (1) Operating Instructions (CD-ROM) (1) Quick Reference Guide (1)