Belkin 5000HQ user manual Technical Specifications, Dimensions

Page 104

Technical Specifications

Table of Contents

sections 1

2

3

4

5

6

7

8

9 10 11 12 13 14 15 16 17 18

19

20 21

	OmniView IP 5000HQ Manager

Form factor	OmniView IP 5000HQ Manager 1U rack-mountable

Dimensions	Height: 4.2cm (1.67 in.)
	Width: 42.6cm (16.78 in.)
	Depth: 29.7cm (11.7 in.)
	With optional bezel: 69.3cm (27.29 in.)
	Without optional bezel: 66cm (26 in.)

Weight (maximum	13.45kg. (29.6 lbs.)
configuration kg..)

Network connectors	2 x RJ45

Protocols	HTTPS, XML, Telnet, SSH

OS	Cent OS 5.0

Power supply	100–240VAC, 50–60Hz, auto-sensing

Client console	Internet Explorer 6.0 or higher with JavaScript support

Certifications	FCC, CE, CSA

Environmental

Temperature	Operating: 10° to 35° C (50° to 95° F)
	Storage: -40° to 65°C (-40° to 149° F)

Relative humidity	Operating: 20% to 80% (non-condensing) with a maximum humidity
	gradation of 10% per hour
	Storage 5% to 95% (non-condensing)

Maximum vibration	Operating: 0.26 Grms at 5–350Hz for 15 min.
	Storage: 1.54 Grms at 10–250Hz for 15 min.

Maximum shock	Operating: One shock pulse in the positive z axis (one pulse on each
	side of the system) of 31 G for up to 2.6ms
	Storage: Six consecutively executed shock pulses in the positive and
	negative x, y, and z axes (one pulse on each side of the system) of 71
	G for up to 2ms

Altitude	Operating: -16 to 3,048m (-50 to 10,000 ft.)
	NOTE: For altitudes above 2,950 feet, the maximum operating
	temperature is de-rated 1° F/550 feet.
	Storage: -16 to 10,600m (-50 to 35,000 ft.)

Airborne	Class G2 or lower as defined by ISA-S71.04-1985
contaminant level

OmniView IP 5000 HQ

100

Image 104

Contents OmniViewIP* 5000HQ Table of Contents Configuring Access Services for Individual Targets Settings ApplicationsSettings Attached Devices Accessing. Targets Administrator Configuring Access Services IntroductionAccessing the System as a User Unit MaintenanceKey features IntroductionIntroduction Pre-Installation Guidelines Pointer tabAdding user-defined Access Services Pre-Installation GuidelinesAccess Services details Understanding the System An Overview Figure below shows a typical OmniView IP 5000HQ applicationCreating targets Understanding the System An OverviewForming users into groups Forming targets into sets Associating a user group with a target setAccess Services Same user in different groupsUnderstanding the System An Overview Setting Up the System Enabling HQ for OmniView IP 5XXXG seriesSetting Up the System Connecting the OmniView IP 5000HQ ManagerOmniView IP 5000HQ Manager’s default IP address Changing the OmniView IP 5000HQ Manager network parametersDisplaying the OmniView IP 5000HQ Web Interface DevicesDisplaying the OmniView IP 5000HQ Web Interface Menu sectionCreating Users UsersCreating Users General tabUser Group tab Removing users from a groupAccess Permissions tab New User Access Permissions tabSaving a user Deleting a userCreating a user group Creating a New User Group Members tabAllowed Services tab Creating New Users Access Permissions tabSaving the new group Deleting a user groupConfiguring Targets List of existing targets in the systemDefault Access Service Configuring TargetsAccess Services tab On the New Target page, click Assignment is removed Assigning power outlet to target PDU tabClick and the outlet number will appear Target Sets tab Current Target Sets tabCreating a target set Saving the targetDeleting targets Saving the target set Current Target sets in the systemDeleting a target set Deleting a target setStatus ManagementDevices Management 10 11 12 13 14 15 16 17 Other Devices Other Devices PDUFollowing commands can be performed from the HQ interface Other Devices Console Server Current console servers in the systemAdding new console servers Serial tab Configuring the KVM IP devices in the OmniView IP 5000HQ Advanced buttonPerformance HighLow MediumConfiguring KVM over IP KVM Ports tab KVM Ports tabNetwork tab KVM-over-IP Device Network tabDevice discovery Saving the KVM-over-IP device configuration changesDeleting KVM-over-IP devices Settings Applications Settings Access ServicesSettings Applications Belkin OmniView IP KVMAccount policy Account policyPassword policy Strict policy passwordStandard policy password Account blockingDNS setting in Ldap mode External authentication LdapOmniView IP 5000HQ in external authentication Ldap mode Ldap settings Importing usersUsers must be members of groups in order to be shown Synchronization Synchronization does two thingsOperating OmniView IP 5000HQ in external authentication mode Global settingsDefault power command OmniView IP 5000HQ session idle time-outSet mouse and performance from KVM/IP session Items PerUploading a new PDU model Settings Attached Devices10..1 PDU Settings Attached Devices KVM switchesUploading a new KVM switch Console serverUploading a new serial console model General note about application paths Configuring Access Services IntroductionAccess Services default values Configuring Access Services Introduction Belkin Serial Console Server11..1..3 Web 11..1..4 ILOWeb mode ILO Web modeLogin Method Web mode defaultRDP Client mode 11..1..5 RDPRDP RDP Client mode 11..1..6 SSHVNC VNC Client mode 11..1..7 VNCDescription Description of the Access Service VNC Telnet VMware Server VMware ServerNew Access Services New ServiceConfiguring Access Services Introduction Configuring Access Services for Individual Targets TargetsConfiguring Access Services for Individual Targets Single Port Console Server12..1..2 Web 12..1..3 ILOWeb mode RDP Web mode 12..1..4 RDP12..1..5 SSH 12..1..6 VNC VNC VNC ClientWeb mode Telnet VMware Server Accessing Targets Administrator Access page columnsPower management column Name columnAccessing Targets Administrator More Access Services columnAccessing a target via KVM-over-IP remote session Status columnChoose to take over or view only or cancel Switching to a different serverNot default Access Service Taking over a busy remote sessionExiting the OmniView IP 5000HQ system Accessing the System as a User Power columnAccessing the System as a User Connecting to a targetChange Password window Accessing a KVM-over-IP Device Directly Maintenance of the System BackupRestoring database backup Maintenance of the SystemBackup elements Resetting OmniView IP 5000HQ configuration Restore SettingsRestoring OmniView IP 5000HQ to factory default settings Firmware upgrade Upgrading the KVM-over-IP device firmware Firmware upgradeReplication Connecting the secondary unit to the networkConfiguring the secondary unit Configuring the primary unit 16. ..4 Promoting a secondary unit to a standalone unitReconfiguring the primary and secondary units Checking the secondary unit Primary unit and secondary unit troubleshootingRedoing the secondary and primary unit configuration Event log Event LogAccess, System, or Configuration tabs Drop-down search menusUnit Maintenance Date & Time tabUnit Maintenance Power Control tabAbout AboutGeneral Troubleshooting Cannot log in to the OmniView IP 5000HQ General TroubleshootingLegacy KVM port switching does not occur Technical Specifications DimensionsTechnical Specifications Weee complianceInformation FCC StatementF1DP101C CE Declaration of ConformityInformation How state law relates to the warranty 104Belkin International, Inc Belkin B..V