Configuring Access Services – Introduction
Table of Contents | sections 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 10 11 12 13 14 15 16 17 18 | 19 | 20 21 |
11..1..6 SSH
Click “SSH”. The following are the default settings for SSH.
Figure 73 RDP – RDP Client mode
RDP Client mode uses an RDP console server. From Windows XP onward, the executable application, mstsc.exe, comes as part of the operating system. For Windows 2000, download the client portion of the remote desktop software from the Microsoft website.
RDP Application Path – The RDP application must be installed on all local computers, preferably in the same path. In the default path %SystemRoot%\System32, the application could be in any drive in the Windows\System32 folder. See the general notes above about variables.
In RDP Client mode, there is only manual login.
Figure 74 SSH
OmniView IP 5000 HQ | 60 |