Belkin user manual Configuring the KVM IP devices in the OmniView IP 5000HQ, Advanced button

Page 41

Management

Table of Contents sections 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21

8..4 Configuring the KVM IP devices in the OmniView IP 5000HQ

Configure a new KVM IP device as follows:

1.In the “New Devices” section, click the MAC address of a KVM IP device. The “General” tab of the “Devices” page appears; see Figure 53.

Status – This is the connection status.

Device Info – Contains information about the device, including its operational status and version numbers of firmware, KME (keyboard, mouse emulation), hardware, SDF (switch definition file), and date and time of last configuration update.

8..4..1 The Advanced button

When required, you can change the performance and mouse settings (the “Set mouse and performance from KVM over IP Session” must be unchecked on the “Settings/Global Settings” page—see the “OmniView IP 5000HQ session idle time-out” section on page 50).

To do so:

Press . The following appears:

Figure 53 KVM-over-IP Devices page – General tab

 

Type – KVM IP device type, OmniView IP 5232K, etc. (read-only field).

Figure 54 KVM-over-IP device – Advanced page

 

Name –You must assign a unique name to each IP device before

 

associating connected targets or KVM switches. Type a name for

 

the device.

 

Description – These are optional fields used for device identification.

 

OmniView IP 5000 HQ

37

Image 41
Contents OmniViewIP* 5000HQ Table of Contents Settings Applications Configuring Access Services for Individual TargetsSettings Attached Devices Accessing. Targets Administrator Configuring Access Services IntroductionUnit Maintenance Accessing the System as a UserIntroduction Key featuresIntroduction Pointer tab Pre-Installation GuidelinesAdding user-defined Access Services Pre-Installation GuidelinesAccess Services details Figure below shows a typical OmniView IP 5000HQ application Understanding the System An OverviewCreating targets Understanding the System An OverviewForming users into groups Associating a user group with a target set Forming targets into setsSame user in different groups Access ServicesUnderstanding the System An Overview Enabling HQ for OmniView IP 5XXXG series Setting Up the SystemConnecting the OmniView IP 5000HQ Manager Setting Up the SystemOmniView IP 5000HQ Manager’s default IP address Changing the OmniView IP 5000HQ Manager network parametersDevices Displaying the OmniView IP 5000HQ Web InterfaceMenu section Displaying the OmniView IP 5000HQ Web InterfaceUsers Creating UsersGeneral tab Creating UsersRemoving users from a group User Group tabNew User Access Permissions tab Access Permissions tabDeleting a user Saving a userCreating a New User Group Members tab Creating a user groupCreating New Users Access Permissions tab Allowed Services tabDeleting a user group Saving the new groupList of existing targets in the system Configuring TargetsDefault Access Service Configuring TargetsAccess Services tab On the New Target page, click Assignment is removed PDU tab Assigning power outlet to targetClick and the outlet number will appear Current Target Sets tab Target Sets tabCreating a target set Saving the targetDeleting targets Current Target sets in the system Saving the target setDeleting a target set Deleting a target setStatus ManagementDevices 10 11 12 13 14 15 16 17 Other Devices Other Devices PDU ManagementFollowing commands can be performed from the HQ interface Current console servers in the system Other Devices Console ServerAdding new console servers Serial tab Advanced button Configuring the KVM IP devices in the OmniView IP 5000HQHigh PerformanceLow MediumKVM Ports tab Configuring KVM over IP KVM Ports tabKVM-over-IP Device Network tab Network tabDevice discovery Saving the KVM-over-IP device configuration changesDeleting KVM-over-IP devices Settings Access Services Settings ApplicationsBelkin OmniView IP KVM Settings ApplicationsAccount policy Account policyStrict policy password Password policyStandard policy password Account blockingDNS setting in Ldap mode External authentication LdapOmniView IP 5000HQ in external authentication Ldap mode Importing users Ldap settingsSynchronization Synchronization does two things Users must be members of groups in order to be shownGlobal settings Operating OmniView IP 5000HQ in external authentication modeOmniView IP 5000HQ session idle time-out Default power commandSet mouse and performance from KVM/IP session Items PerUploading a new PDU model Settings Attached Devices10..1 PDU KVM switches Settings Attached DevicesConsole server Uploading a new KVM switchUploading a new serial console model General note about application paths Configuring Access Services IntroductionAccess Services default values Belkin Serial Console Server Configuring Access Services Introduction11..1..4 ILO 11..1..3 WebILO Web mode Web modeWeb mode default Login MethodRDP Client mode 11..1..5 RDP11..1..6 SSH RDP RDP Client mode11..1..7 VNC VNC VNC Client modeDescription Description of the Access Service VNC Telnet VMware Server VMware ServerNew Service New Access ServicesConfiguring Access Services Introduction Targets Configuring Access Services for Individual TargetsSingle Port Console Server Configuring Access Services for Individual Targets12..1..3 ILO 12..1..2 WebWeb mode 12..1..4 RDP RDP Web mode12..1..5 SSH VNC VNC Client 12..1..6 VNCWeb mode Telnet VMware Server Access page columns Accessing Targets AdministratorPower management column Name columnMore Access Services column Accessing Targets AdministratorAccessing a target via KVM-over-IP remote session Status columnSwitching to a different server Choose to take over or view only or cancelNot default Access Service Taking over a busy remote sessionExiting the OmniView IP 5000HQ system Power column Accessing the System as a UserConnecting to a target Accessing the System as a UserChange Password window Accessing a KVM-over-IP Device Directly Backup Maintenance of the SystemRestoring database backup Maintenance of the SystemBackup elements Resetting OmniView IP 5000HQ configuration Restore SettingsRestoring OmniView IP 5000HQ to factory default settings Firmware upgrade Firmware upgrade Upgrading the KVM-over-IP device firmwareReplication Connecting the secondary unit to the networkConfiguring the secondary unit 16. ..4 Promoting a secondary unit to a standalone unit Configuring the primary unitReconfiguring the primary and secondary units Checking the secondary unit Primary unit and secondary unit troubleshootingRedoing the secondary and primary unit configuration Event Log Event logDrop-down search menus Access, System, or Configuration tabsDate & Time tab Unit MaintenancePower Control tab Unit MaintenanceAbout AboutGeneral Troubleshooting Cannot log in to the OmniView IP 5000HQ General TroubleshootingLegacy KVM port switching does not occur Dimensions Technical SpecificationsWeee compliance Technical SpecificationsFCC Statement InformationF1DP101C CE Declaration of ConformityInformation 104 How state law relates to the warrantyBelkin International, Inc Belkin B..V