Belkin 5000HQ user manual Configuring KVM over IP KVM Ports tab

Management

Table of Contents sections 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21

8..5 KVM Ports tab

In the “KVM Ports” tab, you:

•Associate the KVM switches in the system to the relevant IP device.

•Associate targets with the relevant IP device/port number on the

KVM switch.

Click the “KVM Ports” tab, the following appears.

The KVM switch drop-down list consists of pre-selected KVM switches. You must select all the KVM switch types physically connected to the system; this is done in the “Settings” part of the menu and is explained in the “KVM switches” section on page 52. Select the KVM switch model (if any) physically connected to this IP device. The number of ports in the selected KVM switch appears in the “Ports” section.

Notes:

When using an OmniView 5216/32K Switch, “Internal” is selected by default and cannot be altered.

Figure 55 Configuring KVM over IP – KVM Ports tab

OmniView IP 5000 HQ 39