Manuals / Spectra Logic / Computer Equipment / Power Supply

Spectra Logic 10000 Setting the Library Configuration Switch, SCSI Target Mode Disabled SSCL Only

Models: 10000

1 136
Download 136 pages 25.74 Kb
Page 38
Image 38
Setting the Library Configuration Switch

Chapter 3. Preparing the Library

Setting the Library Configuration Switch

With the library off, use the Spectra Logic screwdriver to set the configuration switch. The library configuration switch determines the operating mode of the library. The table below outlines the mode for each switch setting.

Note: Do not change from the default setting (0) unless instructed to do so by Spectra Logic support personnel.

Config Switch

Mode and Description

 

 

0 (default)

Standard Operation, SCSI Parity Enabled

 

 

1

Standard Operation, SCSI Parity Disabled

 

 

2

SCSI Target Mode Disabled (SSCL Only)

 

 

3

Reserved

 

 

4

Reserved

 

 

5

Reserved

 

 

6

Reserved

 

 

7

Force Firmware Upgrade

 

 

Turn the library on to have the configuration switch setting change take effect.

Note: See Forcing a Firmware Reload on page 70 before setting the configuration switch to position 7.

38

Page 37 Page 39
Page 38
Image 38
Spectra Logic 10000 manual Setting the Library Configuration Switch, Standard Operation, SCSI Parity Enabled
Page 37 Page 39