Chapter 5. Operating the Library
Moving Tapes
To move a single tape, use the Move Tapes screen. To access this screen, from the main screen, touch Main > Move Tapes.
To move a tape:
1.Place a tape into the door slot. The door indicator on the Move Tapes screen darkens, indicating the tape is loaded into the door.
2.Touch the slot or drive to which you want to move the tape. A message appears in the upper left corner of the screen indicating which source location is selected.
Note: If a bar code scanner is installed, and the tape has been read by the bar code scanner, the bar code label will also appear in the upper left corner of the screen.
3.Touch the screen button corresponding to the destination of the tape. The library moves the tape.
•If you select an occupied destination, the library displays the message Move Destination is Full. Touch OK to clear the message. Touch a valid destination button to
•To cancel a move after a source has been selected, press the source button a second time.
59
