Chapter 6. Maintaining the Library

2.Swing the grill open (Figure 6-5).

Figure 6-5Release the grill and swing it open.

3.Inspect the filter, replacing if necessary.

4.Close the grill, making sure that it snaps shut.

Changing Hosts

If you change the host system to which the library is attached, you will have to repeat many of the steps described in previous chapters, including:

Selecting a SCSI bus for the library

Selecting the mode of library operation

Setting up SCSI and power connections

Adjusting drive emulation and library configuration

For lists and diagrams of the different SCSI cables available from Spectra Logic, see SCSI Cables and Terminators on page 119.

85

Page 85
Image 85
Spectra Logic 10000 manual Changing Hosts, 5Release the grill and swing it open