Chapter 3. Preparing the Library

By default, the Library 2 Slots is set to Off for no split logical library operation (Figure 3-2).

Figure 3-2With Library 2 Slots set to off (the default position) the library is configured as one logical library.

2.Using the Library 2 Slots field, set the number of slots devoted to the second logical library.

Tape storage slots are assigned in multiples of 10, so the Library 2 Slots will need to be set to 10, 20, or 30 (for 20-slot libraries, the only option is 10).

Slots not allocated to the second logical library are automatically allocated to the first logical library.

3.Set the SCSI Bus 2 ID to a unique number on the second SCSI bus.

This ID will need to be set to a SCSI ID different from the other devices connected to the SCSI Port 2 connection.

4.To save the changes, press SAVE PARMS.

A message displays: PARAMETERS SAVE, RESTART?

5.Select YES. The library restarts with the new configuration settings.

6.To set the drive emulation settings, read Configuring Library Tape Drive Settings on page 54.

32

Page 32
Image 32
Spectra Logic 10000 manual Message displays Parameters SAVE, RESTART?