Chapter 5. Operating the Library
this feature). When this period expires, the library displays the Queued Unload message on the main screen (Figure
Figure 5-1 The Queued Unload message.
The backup software specifies which tapes are to be moved out of the library.
Note: Performing any export media function via the backup software will place the piece of media in a queued unload status when this option is enabled on the library.
Enabling Queued Unloads To use queued unloads, your backup software must support this feature, and you must enable the Queued Unloads setting.
To enable queued unloads:
1.From the main screen, touch Config > More. The second Configuration screen displays.
2.On the second Configuration screen, touch the + symbol beside the Queued Unloads button. Queued unloads are enabled.
3.Touch Save Parms > No, because it is not necessary to restart the library for these changes to take effect.
Using Queued Unloads If you have enabled the queued unloads settings in the library and in your backup software, the Queued Unloads button will appear when tapes are ready to be moved out of the library.
62
