Chapter 3. Preparing the Library
Air Quality
Large quantities of airborne particles cause erratic operation of the drives and library. The library comes with an intake air filter behind the front panel to reduce the amount of airborne particulates entering the library.
The table below shows the maximum amount of particulate contamination per cubic foot and cubic meter of air which the library’s filter can handle. If you are exceeding these limits, filter the air in the room where you are using the library.
| Number of Particles |
|
|
|
|
Particle Size | ≥ Particle Size per Cubic Foot | ≥ Particle Size per Cubic Meter |
|
|
|
0.1 microns | 2.5 x 106 | 8.8 x 107 |
|
|
|
0.5 microns | 1.0 x 106 | 3.5 x 107 |
|
|
|
5.0 microns | 7.0 x 103 | 2.5 x 105 |
|
|
|
Rack Mount vs. Tabletop Configuration
The standard library configuration uses a
Spectra Logic offers a rack mount upgrade kit that allows a user to convert a tabletop library to either a white or black rack mount library. Contact your sales representative for more information about these kits.
Installing in Enclosed Equipment Racks To use an enclosed rack for the library, you need an enclosed rack mount model or an enclosed rack mount conversion kit. To identify models compatible with enclosed racks, compare the part number from the library’s serial number sticker (located on the back of the library) to the part number shown below. Make sure that your library’s serial number contains an M or a 3 in the last position (shown here).
9284AXXX-X-XM or 9284AXXX-X-X3
An M shown in the part number indicates a white enclosed rack mount model, and a 3 indicates a black enclosed rack mount model.
Spectra Logic offers an enclosed rack mount upgrade kit that allows a user to convert a
27
