Belkin OmniView IP 5000HQ session idle time-out, Set mouse and performance from KVM/IP session

Settings – Applications

Table of Contents sections 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21

9..3..1 OmniView IP 5000HQ session idle time-out

Select the number of minutes of non-activity, after which the OmniView

IP 5000HQ sessions will terminate. The user will then have to re-log in.

Set mouse and performance from KVM/IP session

This check box determines who updates the local mouse and performance settings. When checked, local mouse and performance settings are determined at the remote session level. Deselecting this option will apply default settings to all devices. In order to change the settings, the administrator must configure each device separately.

By selecting the check box, OmniView IP 5000HQ will not overwrite local mouse and performance settings made in the client toolbar.

Allow all “Access Services” for users without group assignment

For users not assigned to any user groups, select the check box to allow all “Access Services” by default. Deselecting this option prevents access to any service for individual users that don’t belong to any group, including administrators.

Default power command

For power management devices, you can select the default power command from the drop-down list. Choose “Prompt”, “On”, “Off”, or “Cycle”. The chosen command will be the default sent to the connected device.

Items Per Page

Select the maximum number of items—targets, groups, etc.—to appear on one page. When this number is reached, additional items are put on another page. Click on the page link to open the next page.

Click “Save” to save changes.

OmniView IP 5000 HQ 50