Initio I/O HIGHWAY manual Control Panel

24

Microsoft Windows 95/95b (OSR2) Driver Installation

1Access the Windows 95 CD-ROM from either the DOS prompt or from Microsoft Windows 3.x File Manager. Execute the SETUP.EXE program and follow the instruc- tions on your screen. If you are installing from floppy diskette, insert the Windows 95 Setup Disk 1 in your floppy disk drive and boot your system. Follow the instructions on your screen.

2Once a Windows 95 session is established, use your installed mouse or the appropri- ate key strokes to select MY COMPUTER from the MAIN DESKTOP. Execute the following steps:

•Select CONTROL PANEL from within the MY COMPUTER icon.

•Select SYSTEM from within the CONTROL PANEL group

•Select DEVICE MANAGER tab from within the SYSTEM group

•Select the OTHER DEVICES category from within the DEVICE MANAGER listing.

•Select the PCI-SCSI Bus Controller sub-category from within the OTHER DE- VICES listing.

•In the Initio PCI-SCSI Bus Controller Properties window, select the DRIVER tab, then select “CHANGE DRIVER...”.

•In the SELECT HARDWARE TYPE window, select SCSI CONTROLLERS.

•In the SELECT DEVICE window, select “HAVE DISK...”.

3In the INSTALL FROM DISK window, enter the Initio Driver path name:

•Insert the INI-9XXXU/9XXXUW DRIVER DISK 1 into drive A:

•Type: A:\WIN95, select “OK”

4Select Initio INI-9XXXU/UW PCI SCSI Host Adapter, select “OK”, then “OK” again to install the INI910U.MPD driver onto your hard disk drive. It may be necessary to direct Windows to look for the driver in A:\win95 before the driver can be copied. This step may need to be repeated more than once.

5Following installation of the Initio INI-9XXXU/UW Windows 95 driver for all channels, reboot your system to activate the SCSI device driver.

6It is highly recommended that you Initio’s Windows 95 device driver has been properly installed by selecting MY COMPUTER from the desktop. Then select

CONTROL PANEL:

•Select SYSTEM from within the CONTROL PANEL group,

•Select DEVICE MANAGER from within the SYSTEM group,

•Select SCSI CONTROLLER from within the DEVICE MANAGER listing, and

•Select Initio INI-9XXXU/UW PCI SCSI Host Adapter from within the SCSI CONTROLLER listing. If “This device is working properly” is displayed on your screen, the driver has been correctly installed.

initio®