Initio I/O HIGHWAY manual Changing to the INI-9XXX as the bootable host adapter

45

SCO Unix Driver Installation

Changing to the INI-9XXX as the bootable host adapter:

1Insert the INI-9XXXU/9XXXUW DRIVER DISK 2 diskette into floppy drive.

2Type: “installpkg” under command prompt and press <ENTER>. The system will ask you what packages you want to install.

•Type: i91u <ENTER>

3 Change the mscsi file:
• cd /etc/conf/cf.d	< ENTER >

•cp mscsi mscsi.bak < ENTER >

• vi mscsi < ENTER >

In the example below, The XXXX would be replaced with i91u.

ha	attach	number	ID	lun
XXXX	Stp	0	2	0
XXXX	Sdsk	0	0	0
XXXX	Srom	0	5	0

4Rebuild the UNIX kernel:

•. /link_unix < ENTER >

5You have completed the link procedure for the Initio device driver. Exit and reboot the system.

initio®