Initio I/O HIGHWAY manual Product Specifications

Page 8

4

Product Features/Specifications

Command Queuing: A unique implementation to provide 255 simultaneous SCSI commands.

SCSI compliant: I/OHIGHWAY is fully SCSI compliant, implementing advanced features such as:

Tag Queuing

Sync/Async Transfers

Disconnect / Reselect Arbitration

Product Specifications

Power Requirements

• 5.0 ± 0.25 V at 0.51 Amps maximum not including bus termination

Physical Dimensions

• 5.75” x 3.40” (14.61 cm x 8.65 cm)

Environmental Specifications

Operating Temperature

0 to 55°C (32 to 131°F)

10% to 90% relative humidity (non-condensing)

Storage Temperature

-40 to 75°C (-40 to 167°F)

5% to 95% relative humidity (non-condensing)

initio®

Image 8
Contents Initioi D119-03 May Third Edition Contents Troubleshooting Index Product Warranty Host Adapter IntroductionInitio Technical Illustration INI-9100A Board LayoutProduct Features/Specifications Product FeaturesProduct Specifications Getting Started Host Adapter and the Scsi BusScsi bus preparation Scsi bus terminationOhighway possible termination settings OFFHardware Installation Installation BasicsInstallation in Ten Easy Steps OhighwayInserting the host adapter into a PCI slot Connecting the 50-pin internal flat ribbon cable Hardware Installation Hard Disk Drive Preparation Low-level FormatInitio Host Adapter Setup Running the SmartSCSI Setup UtilityDevice Setup Main Menu OptionsAdapter Setup Data can be Lost by Changing SettingsBios Setup Disk UtilitiesInitio Overview MS-DOS/Windows 3.1x Driver InstallationInstallation MS-DOS/Windows 3.1x Driver Installation Aspi Manager Command Line Options Aspi CD-ROM Driver Command Line OptionsSample CONFIG.SYS and AUTOEXEC.BAT Files Autoexec.batAspi Disk Driver Command Line Options Sample CONFIG.SYS Aspi Partition & Format UtilityMicrosoft Windows 95/95b OSR2 Driver Installation New Windows 95/95a InstallationControl Panel Microsoft Windows 95/95b OSR2 Driver Installation Updating the Initio Windows 95/95a Device Driver New Windows 95B OSR2 Installation Microsoft Windows 95/95b OSR2 Driver Installation Updating the Initio Windows 95B OSR2 Device Driver Initio Microsoft Windows NT Driver Installation New Windows NT InstallationMicrosoft Windows NT Driver Installation Control Panel Installing a new Windows NT system from a Bootable CD Novell NetWare Driver Installation New IntraNetWare InstallationNovell NetWare Driver Installation PCI.XXXX.XXXX.XXXX.XXXX.XXUpgrading/Changing Driver on an Existing IntraNetWare Server Device driver command line options Driver Config OptionsIBM OS/2 Driver Installation New OS/2 installationAdding the Initio driver to an existing OS/2 system Device driver command line options Initio 10Overview SCO Unix Driver InstallationUpdating interrupts and hardware settings Enter Installing the Initio driver in a new SCO Unix systemAdding the Initio driver to an existing SCO Unix system Changing to the INI-9XXX as the bootable host adapter Initio SCO UnixWare Driver Installation Installing the Initio driver in a new UnixWare systemAdding the Initio driver to an existing UnixWare system Using Multiple Host Adapters Removing the Initio driver from a UnixWare systemSCO UnixWare Driver Installation Troubleshooting DOS Space 1GB MS-DOS, OS/2 & Windows NTDrives with Multiple Operating Systems Initio Index OEMSETUP.INF SETUP.EXE SYSTEM.INI TXTSETUP.OEMUpdate Driver Windows NT Workstation SetupProduct Warranty FCC Compliance StatementDeclaration of the Manufacturer/Importer EN 55 9100UW2 Declaration of Conformance