Initio I/O HIGHWAY manual Connecting the 50-pin internal flat ribbon cable

Page 13

9

Hardware Installation

When attaching FastSCSI devices, use the 50-pin FastSCSI cable connector on the host adapter. Align the internal cable into the host adapter and the other cable connectors in a similar fashion into the other SCSI device connectors as described in the appropriate manufacturers instructions.

FIGURE 4 – Connecting the 50-pin internal flat ribbon cable

4b Installation of external SCSI cables

Installation of external SCSI cables can be performed after the cover has been closed. The cable is limited in length to a total of six meters including any internal cabling. The external cable can be daisy chained to include up to seven with the host adapter in combination with internal devices. The external cable is designed to be inserted only one way, requiring termination at the end peripheral device on the bus (FIGURE 5).

FIGURE 5 – External cable connection

initio®

Image 13

Contents Initioi D119-03 May Third Edition Contents Troubleshooting Index Product Warranty Initio IntroductionHost Adapter INI-9100A Board Layout Technical IllustrationProduct Features Product Features/SpecificationsProduct Specifications Host Adapter and the Scsi Bus Getting StartedScsi bus preparation Scsi bus terminationOFF Ohighway possible termination settingsInstallation Basics Hardware InstallationInstallation in Ten Easy Steps OhighwayInserting the host adapter into a PCI slot Connecting the 50-pin internal flat ribbon cable Hardware Installation Low-level Format Hard Disk Drive PreparationInitio Running the SmartSCSI Setup Utility Host Adapter SetupDevice Setup Main Menu OptionsData can be Lost by Changing Settings Adapter SetupDisk Utilities Bios SetupInitio Installation MS-DOS/Windows 3.1x Driver InstallationOverview MS-DOS/Windows 3.1x Driver Installation Aspi CD-ROM Driver Command Line Options Aspi Manager Command Line OptionsAutoexec.bat Sample CONFIG.SYS and AUTOEXEC.BAT FilesAspi Disk Driver Command Line Options Aspi Partition & Format Utility Sample CONFIG.SYSNew Windows 95/95a Installation Microsoft Windows 95/95b OSR2 Driver InstallationControl Panel Microsoft Windows 95/95b OSR2 Driver Installation Updating the Initio Windows 95/95a Device Driver New Windows 95B OSR2 Installation Microsoft Windows 95/95b OSR2 Driver Installation Updating the Initio Windows 95B OSR2 Device Driver Initio New Windows NT Installation Microsoft Windows NT Driver InstallationMicrosoft Windows NT Driver Installation Control Panel Installing a new Windows NT system from a Bootable CD New IntraNetWare Installation Novell NetWare Driver InstallationPCI.XXXX.XXXX.XXXX.XXXX.XX Novell NetWare Driver InstallationUpgrading/Changing Driver on an Existing IntraNetWare Server Driver Config Options Device driver command line optionsNew OS/2 installation IBM OS/2 Driver InstallationAdding the Initio driver to an existing OS/2 system Device driver command line options Initio Updating interrupts and hardware settings SCO Unix Driver Installation10Overview Adding the Initio driver to an existing SCO Unix system Installing the Initio driver in a new SCO Unix systemEnter Changing to the INI-9XXX as the bootable host adapter Initio Installing the Initio driver in a new UnixWare system SCO UnixWare Driver InstallationAdding the Initio driver to an existing UnixWare system Removing the Initio driver from a UnixWare system Using Multiple Host AdaptersSCO UnixWare Driver Installation Troubleshooting MS-DOS, OS/2 & Windows NT DOS Space 1GBDrives with Multiple Operating Systems Initio Index SETUP.EXE SYSTEM.INI TXTSETUP.OEM OEMSETUP.INFUpdate Driver Windows NT Workstation SetupFCC Compliance Statement Product WarrantyEN 55 9100UW2 Declaration of Conformance Declaration of the Manufacturer/Importer