Initio I/O HIGHWAY manual Novell NetWare Driver Installation, New IntraNetWare Installation

			35
8			Novell NetWare Driver Installation
	Overview
	I/OHIGHWAY will support Novell NetWare 386 V4.XX or V3.1X with the addition of a
	software driver.	The installation procedure described here requires some experience in
	Novell system	setup and administration. The device driver is transferred from the INI-
	9XXXU/9XXXUW DRIVER DISK 1 to the hard drive where it is automatically initialized
	during the system boot routine. The device drivers listed can support NetWare versions
	described after the Initio file name:
	\NETWARE\V31X\INI910U.DSK		Initio Novell adapter driver for V3.1X
	\NETWARE\V31X\ASPITRAN.DSK		ASPI transport layer driver for V3.1X
	\NETWARE\V4X\INI910U.DSK		Initio Novell adapter driver for V4.X or later
	\NETWARE\V4X\INI910U.DDI		Device driver installation file
	\NETWARE\V4X\ASPITRAN.DSK		ASPI transport layer driver for V4.X or later
	\NETWARE\HAM\INI9100.HAM		HAM device driver
	\NETWARE\HAM\INI9100.DDI		HAM device driver installation file

Installation

The drivers developed by Initio for NetWare will be installed on the disk drive used for NetWare system initialization. It is strongly recommended that the selected procedure be read and understood before continuing with the system configuration or change. Please read the instructions carefully.

New IntraNetWare Installation

Drivers for the Initio host adapter may be found on the INI-9XXXU/9XXXUW DRIVER DISK 1. In most cases you will load the drivers during a new installation of NetWare from CD-ROM. The driver is loaded during the NetWare Server Installation procedure. The NetWare installation program will prompt you for the required parameters as the installa- tion procedure progresses. It is highly recommended that you have a copy of the Novell NetWare Installation and Upgrade Manual for reference.

1At the MS-DOS prompt for CD-ROM installation, change directories to where the installation files are located.

e.g., d:\ <ENTER>

2Type INSTALL <ENTER> to initialize the installation routine

3 Select installation Language. <ENTER>.

4 Select NetWare Server Installation <ENTER>

5 Select product type <ENTER>

initio®