Initio I/O HIGHWAY manual Off, Ohighway possible termination settings

6

Getting Started

I/OHIGHWAY’s SCSI termination can be set to auto-termination or programmable mode via the SmartSCSI Setup Utility. This feature allows the operator to switch the auto- termination On or Off. If auto-termination is switched off, the operator can manually program termination for the host adapter. There are three ways to manually control terminating the host adapter on the SCSI bus (see TABLE 1).

SCSI Devices Configuration	SCSI Channel Termination
Internal Devices Only 1	ON
External Devices Only 1	ON
Internal & External Devices2	OFF

TABLE 1 - I/OHIGHWAY possible termination settings

1Assumption: Host adapter is at the end of the SCSI bus

2Assumption: Host adapter is in the middle of the SCSI bus

initio®