Energy Tech Laboratories EDP70 manual Time on Reserve xxg xxh xxm xxs

Page 49

TIME ON RESERVE xxg: xxh: xxm: xxs

press once

LAST MAINS FAILURE xxd: xxh: xxm: xxs

press once

MAINS FAILURE yy

xxgg: xxh: xxm: xxs

press once

TOTAL MAINS FAILURE yy

xxg: xxh: xxm: xxs

press once

REV A. XX xx-xx-xx

10h00yyy

Displays the total time the load has been supplied by the reserve since the machine was last switched off.

Displays the duration time of the most recent Mains Failure

Displays the number of mains failures and the total duration of these failures since the machine was last switched off.

Displays the total number of mains failures and their total duration since the machine was installed.

Displays the code for the version of software resident (and relevant data) within the EDP70 PLUS UPS system

MI00/10056 rev.1--05/2001-- page 49

Image 49

Contents EDP70 Plus Important Safety Instructions Read Before Installing ALL CASES, Seek Medical Attention Immediately Contents Figures Introduction Block diagramSummary of the manual Summary of the equipment24kVA Standard Configuration 480V Functions24/36kVA Ratings Operational modes10 --MI00/10056 rev.1--05/2001 General safety SafetySymbols Battery precautions Electrical precautionsBattery safety equipment Mechanical characteristics InstallationStorage ALL Measurements are Millimeters and Inches NR4 16 --MI00/10056 rev.1--05/2001 Battery Cabinet Drawing for 24/36kVA Ratings 18 --MI00/10056 rev.1--05/2001 Battery Cabinet Drawing for 50/80kVA Ratings 20 --MI00/10056 rev.1--05/2001 Installation Recommended wire sizes Supply Output Reserve Supply UPS Type = 2770 - - - ∙ e 0.125 h Tk / T0 Tr Tk VentilationOutput ConnectionUninterruptible Power System No Unauthorized Operation MI00/10056 rev.1--05/2001-- Electrical connections Table of T& B’s cat.no.s for terminals and crimp tools24 12/18/24kVA Battery CompartmentOutput, Reserve, Input Reserve Ground Primary Input Output External Batteries 36 24/30/36kVA Observe Polarities and Orientations RS232 Female EDP70 Plus 50/80kVA 36 --MI00/10056 rev.1--05/2001 QS1 QS2 QS3 QS4 QS5 Emergency Power Off Signal connectionsBattery charge inhibited Thermostick connector 50/80kVA onlyControls Display indicatorsUser Controls LCD Control PanelStart UP Installing the EPO Maintenance BypassSHUT-DOWN MI00/10056 rev.1--05/2001-- Silencing Audible Alarm Visual and Audible AlarmsMimic Liquid Crystal DisplaySystem Normal Display Page HeadingsBattery Test Weekly Power History Down to Access Load Time on Reserve xxg xxh xxm xxs Inverter Load System Alarm Abnormal operating mode messagesStop DUE to Overload RECTIFIER/BATTERY Alarms Message Condition Inverter Alarms Message Condition LOAD/RESERVE Alarms Message Condition Power History Matrix Power HistoryBattery Autonomy Test Battery TestResetting data loss manually MI00/10056 rev.1--05/2001-- 11.1 AS400 Computer Interface11.2 RS232 Remote AlarmsBatteries 13.1 EDP70 PLUS/24/18/12 Battery Installation/Start-up13.2 EDP70 PLUS/24/18/12 Optional Battery Cubicle = EDP70 PLUS/24/18/12 Internal Battery Shelves13.3 EDP70 Plus above 20kVA Battery Installation/Start-up Maintenance and Spare Parts13.4 EDP70 Plus above 20kVA Battery Cubicle EDP70 Plus System LOG