Dell R805 manual Back-Panel Features and Indicators, Hard-Drive Indicator Codes

Page 4

Hard-Drive Indicator Codes

The hard-drive carriers have two indicators—the drive-activity indicator and the drive-status indicator. See Figure 1-2. In RAID configurations, the drive-status indicator lights to indicate the status of the drive. In non-RAID configurations, only the drive-activity indicator lights; the drive-status indicator is off.

Figure 1-2. Hard-Drive Indicators

1 drive-status indicator (green and amber) 2 green drive-activity indicator

Table 1-3 lists the drive indicator patterns for RAID hard drives. Different patterns are displayed as drive events occur in the system. For example, if a hard drive fails, the "drive failed" pattern appears. After the drive is selected for removal, the "drive being prepared for removal" pattern appears, followed by the "drive ready for insertion or removal" pattern. After the replacement drive is installed, the "drive being prepared for operation" pattern appears, followed by the "drive online" pattern.

NOTE: For non-RAID configurations, only the drive-activity indicator is active. The drive-status indicator is off.

Table 1-3. Hard-Drive Indicator Patterns for RAID

Condition

Drive-Status Indicator Pattern

 

 

 

 

Identify drive/preparing for removal

Blinks green two times per second

 

Drive ready for insertion or removal

Off

 

 

 

 

Drive predicted failure

Blinks green, amber, and off.

 

 

 

 

Drive failed

Blinks amber four times per second.

 

 

 

 

Drive rebuilding

Blinks green slowly.

 

 

 

 

Drive online

Steady green.

 

 

 

 

Rebuild aborted

Blinks green three seconds, amber three seconds, and off six seconds.

 

 

 

 

 

 

 

Back-Panel Features and Indicators

Figure 1-3 shows the controls, indicators, and connectors located on the system's back panel.

Figure 1-3. Back-Panel Features and Indicators

1

PCIe slot 1

2

PCIe slot 2

 

 

 

 

3

PCIe slot 3

4

PCIe slot 4

 

 

 

 

5

power supply bay 1 (PS1)

6

power supply bay 2 (PS2)

 

 

 

 

Image 4
Contents Page Accessing System Features During Startup Keystrokes for Accessing System FeaturesBack to Contents Other Information You May NeedFront-Panel Features and Indicators Indicator, Button, or Icon Description ConnectorBack-Panel Features and Indicators Hard-Drive Indicator CodesHard-Drive Indicator Patterns for RAID Condition Drive-Status Indicator PatternPower Indicator Codes NIC Indicator CodesConnecting External Devices Redundant Power Supply IndicatorsNIC Indicator Codes Indicator Indicator CodeLCD Status Messages LCD Status MessagesSee Troubleshooting System Cooling Problems Troubleshooting System Cooling ProblemsTroubleshooting the Microprocessors See Troubleshooting the MicroprocessorsSee Troubleshooting a Hard Drive Install memory. See Installing Memory ModulesSee Troubleshooting System Memory Daughter CardSolving Problems Described by LCD Status Messages System MessagesRemoving LCD Status Messages System MessagesTroubleshooting System Memory See Installing a RAC CardTroubleshooting Your System for any faulty components Troubleshooting a Hard Drive. See Using the System SetupUSB Device, or Troubleshooting a Hard Drive for See Troubleshooting a USB Device or Troubleshooting a HardCombination. See Installing a Processor See Troubleshooting the System BatteryDiagnostics Messages Alert MessagesBack to Contents Using Server Administrator Diagnostics System Diagnostics FeaturesWhen to Use the System Diagnostics Running the System DiagnosticsUsing the Custom Test Options Selecting Devices for TestingSelecting Diagnostics Options System Diagnostics Testing OptionsContacting Dell Contacting DellVisit support.dell.com Glossary Page Page System memory See RAM Back to Contents Installing System Components Inside the System Recommended ToolsFront Bezel Opening and Closing the System Removing the Front BezelReplacing the Front Bezel Opening the SystemHard Drives Closing the SystemInstalling a Drive Blank Installing a Hot-Plug Hard DriveRemoving a Drive Blank Removing a Hot-Plug Hard DriveReplacing a Hard-Drive Carrier Installing a Hard Drive Into a Drive CarrierRemoving a Hard Drive From a Hard-Drive Carrier Power Supplies Removing a Power SupplyReplacing a Power Supply Removing the Power Supply BlankInstalling the Power Supply Blank Internal SD CardSystem Fans Installing the SD CardRemoving a System Fan SAS Controller Daughter Card Installing a SAS Controller Daughter CardReplacing a Cooling Fan Removing a SAS Controller Daughter Card 11. SAS Controller Daughter Card CablingRAID Battery Configuring the Boot DeviceInternal USB Memory Key Connector Installing a RAID BatteryInstalling the Optional Internal USB Memory Key Expansion CardsInstalling an Expansion Card Expansion Card Installation GuidelinesRemoving an Expansion Card Cooling Shrouds Removing the Memory Module Cooling ShroudsInstalling the Memory Module Cooling Shrouds Installing the Processor Cooling ShroudRemoving the Processor Cooling Shroud Removing the Fan Brackets Fan BracketsReplacing the Fan Bracket Removing Expansion-Card Riser Expansion-Card RisersReplacing Expansion-Card Riser Removing the Riser 2 Board From the Expansion-Card Bracket 18. Removing and Replacing Expansion-Card RiserReplacing the Riser 2 Board on the Expansion-Card Bracket RAC CardRemoving the RAC Card Installing a RAC Card 20. Removing and Installing a RAC CardLOM Daughter Card Removing the LOM Daughter CardInstalling the Optical Drive Optical DriveReplacing the LOM Daughter Card Removing the Optical Drive from the System22. Removing and Installing the Optical Drive Tray Removing the Optical Drive From the Optical Drive TrayInstalling an Optical Drive Into the Optical Drive Tray General Memory Module Installation GuidelinesMemory Configurations System MemoryMemory Sparing Configurations Installing Memory ModulesMemory Sparing Support 25. Installing and Removing a Memory Module Removing Memory ModulesProcessors Integrated NIC TOERemoving a Processor Installing a Processor 26. Installing and Removing the Heat SinkSystem Battery Replacing the System BatterySideplane Board Removing the Sideplane BoardSAS/SATA Backplane Board Installing the Sideplane BoardRemoving the SAS/SATA Backplane Board Control Panel Assembly Installing the SAS/SATA Backplane BoardRemoving the Control Panel Assembly Installing the Control Panel AssemblySystem Board Removing the System BoardInstalling the System Board Replace the sideplane. See Installing the Sideplane BoardJumper Setting Description System Board JumpersSystem Board Connectors Connector DescriptionSAS/SATA Backplane Board Connectors Sideplane Board ConnectorsExpansion-Card Riser-Board Components and PCIe Buses Disabling a Forgotten PasswordOpen the system. See Opening and Closing the System Back to Contents Entering the System Setup Program System Setup OptionsResponding to Error Messages Using the System Setup ProgramSystem Setup Program Options Using the System Password and Using the Setup PasswordMemory Information Screen Memory Information ScreenIntegrated Devices Screen CPU Information ScreenCPU Information Screen Serial Communication Screen System Security ScreenIntegrated Devices Screen Options Serial Communication Screen OptionsSystem and Setup Password Features EnabledDisabled Exit ScreenUsing the System Password Assigning a System PasswordUsing the Setup Password Deleting or Changing an Existing System PasswordBaseboard Management Controller Configuration Entering the BMC Setup ModuleBMC Setup Module Options See Disabling a Forgotten PasswordSafety First-For You and Your System Troubleshooting IRQ Assignment ConflictsStart-Up Routine Checking the EquipmentTroubleshooting External Connections Troubleshooting the Video SubsystemIRQ Assignment Defaults IRQ Line AssignmentTroubleshooting the Keyboard Troubleshooting Basic I/O FunctionsTroubleshooting the Mouse Troubleshooting a Serial I/O Device Troubleshooting a USB DeviceTroubleshooting a Wet System Troubleshooting a NICClose the system. See Opening and Closing the System Troubleshooting a Damaged System Troubleshooting the System BatteryTroubleshooting Power Supplies Troubleshooting System Cooling ProblemsTroubleshooting System Memory Troubleshooting a FanTroubleshooting an SD Card or Internal USB Key Troubleshooting an Optical Drive Troubleshooting an External Tape DriveTroubleshooting a Hard Drive Remove the bezel. See Removing the Front BezelTroubleshooting a SAS Controller Daughter Card Troubleshooting Expansion Cards Troubleshooting the Microprocessors
Related manuals
Manual 200 pages 56.14 Kb