Datamax DGL manual Workaround

<STX>Y	Output Sensor Values
	DataMax Values do not correspond with PTX values.
<STX>D	Memory Dump (Test Mode Only)
<STX>d	Set Printer to double buffer mode
<STX>s	Set Printer to single buffer mode
	This only affects the internal processing of dynamic fields, cannot
	be changed in DGL, which always prints using display list.
<STX>g	Internal Batch Software Mode
<STX>N	Enter Internal Batch
f	Set Present Speed

pSet Backfeed Speed

FR[+/-]n Degrees

Label Length:

When Datamax receives a label that exceeds the configured physical page-length, it will still print the whole job by spanning it across multiple physical pages. DGL will clip the job at the configured physical page-length.

Workaround

·<SOH>U	Update System Database with Current Database
<STX>KC	Get Configuration
<STX>Kc	Set Configuration
<STX>Kd	Set File as Factory Defaults
<STX>KF	Select Factory Defaults
<STX>KQ	Query Memory Configuration
<STX>Kq	Query Memory Configuration (new format)
<STX>Kx	Delete Configuration File
<STX>KD	Database Configuration
<STX>KR	Reset Memory Configuration

eRecall Printer Configuration

PTX has its own Configuration Management.

<STX>Kr Reset Internal Counters

Use DIAGNOSTICS/Reset Head Data to reset the Head Print Distance

<STX>KV Verifier Enable/Disable

Use Validator Menu options

<STX>KI GPIO Input

43