Code Alarm CR3 manual Reader ID and Firmware Version, Reader Settings Lock, Example

4.7 - Reader ID and Firmware Version

To fi nd out the Reader ID and fi rmware version, open a text editor program (i.e., Notepad, Microsoft Word, etc.) and read the following code:

Reader ID and Firmware

Note: For units with a Bluetooth Radio, the Reader ID is also your Bluetooth Radio PIN #.

You will see a text string indicating your fi rmware version and CR3 ID number (see below):

Xap/iVVVVWWWWXXXXSSSSSSSSSSPXX-XX+XXX

Xap/i - Code Internal ID (not applicable)

VVVVis the application fi rmware version number

WWWWis the bootloader fi rmware version number

XXXXis the radio fi rmware version number

SSSSSSSSSSReader’s serial number (ten digits)

P is “A” if running fi rmware is the application, “B” if BootLoader XXX-XX+XX - Internal ID (not applicable)

Example:

Xap/i3000300006040010002363A06D-SD+SQ

Note: Code will periodically release new fi rmware for CR3 units. For information on latest fi rmware versions, call Code at (801) 495-2200. To upgrade fi rmware, please visit our website at http://www. codecorp.com/support/downloads.htm and follow instructions provided.

4.8 - Reader Settings Lock

To lock or unlock the current settings on your reader please scan the codes below:

Reader Settings Locked Reader Settings Unlocked

NOTE: Prefi x and Suffi x programming codes, memory transfer and delete commands, “Clear All CodeXML Rules” and “Suffi x -Erase/None”commands are not locked by this feature.

Save Settings C002332_09_CR3 User Manual - 47