4.3Inserting the Paper
CAUTION:
1)Be sure to use the specified paper roll.
2)Use of
3)Do not use thermal paper when the printer has been set for label paper, and vice versa. It could cause malfunctioning of the printer or damage the printing head.
1.Hold the convexity on the rear of the printer cover, and raise it upward.
2.Cut the front end of the paper roll almost at a right angle.
CAUTION:
1)The printer cover is not stationary (Opening/Closing). After detaching it, be careful not to lose or break it.
2)Do not insert a ragged or
3.Make sure that the power is turned on.
4.Pull the
5.If there is still some paper remaining after a
6.Insert the front end of the paper roll straight into a paper insertion slot.
7.Set the paper roll firmly in the paper holder.
8.Put back the
feed a constant amount of paper. (When
9. Put back the printer cover.
CAUTION:
1)If the paper roll is still slack, rewind the paper to remove the slack.
2)If the paper roll is tilted, raise the
3)Do not open the printer cover while printing.
4)Do not hold or press the paper roll while printing, because it could cause a paper jam.
24 | CITIZEN |