Citizen CBM-270 user manual GS c

CBM-270 User’s Manual

[Caution]	If the N5 counter start value is beyond the counter range specified with N1 and
	N2, it is assumed to be N1 = N5. If each value of N1 through N5 contains a
	character code other than "0" through "9" , the printer will invalidate the data up
	to that parameter and handle the subsequent data as normal print data.
[Default]	N1 = 1
	N2 = 65535
	N3 = 1
	N4 = 1
	N5 = 1
[See Also]	GS C0, GS C1, GS C2, GS c
[Sample Program]
	LPRINT CHR$ (&H1D) ; "C0" ;		* CNT
	LPRINT CHR$ (3) ; CHR$ (0) ;		FOR I=1 TO 6
	LPRINT CHR$ (&H1D) ; "C" ;		LPRINT CHR$ (&H1D) ; "c" ;
	LPRINT "50 ; 0 ; 5 ; 2 ; 50 ; " ;		NEXT I
	GOSUB * CNT		LPRINT CHR$ (&HA) ;
	LPRINT CHR$ (&H1D) ; "C ; " ;		RETURN
	LPRINT "50 ; 0 ; 5 ; 2 ; 5 ; " ;
	GOSUB * CNT
	END
[Print Result]			When setting a count-down range = 0 to 50, step
			value = 5, repeat count = 2, and start value = 50
			to print a counter value.
			When setting a count-down range = 0 to 50, step
			value = 5, repeat count = 2, and start value = 5 to
			print a counter value.
GS c
[Function]	Printing the counter
[Code]	<1D>H<63>H
[Outline]	This command prints the serial number counter data. After setting the current
	counter value in the print buffer as the print data (Character string), it
	increments or decrements the counter according to the set count mode.
[Caution]	When setting the value in the print buffer, its format depends on the GS C0
	command. The count mode depends on the GS C1 or GS C; command. If the
	counter final value set with these commands if exceeded by executing the GS c
	command, the counter will be initialized to the set default.
[See Also]	GS C0, GS C1, GS C2, GS C ;
[Sample Program]		[Print Result]
	See the sample programs and print results for the commands on Pages 82
	through 85.

87 CITIZEN