Citizen CBM-270 user manual DIP Switch Setting, Location of DIP Switch, DIP Switch Function

CBM-270 User’s Manual

5.DIP SWITCH SETTING

5.1Location of DIP Switch

1.Turn off the power.

2.Detach the printer cover, and take out the paper roll. (The switch is found under the paper roll.)

3.There are 2 switches (8-pole and 4-pole) for the serial interface, and 1 switch (8-pole) for the parallel interface.

5.2DIP Switch Function

DS1

No.	Function	ON	OFF	Upon Shipment
1	PNE selection	Enabled	Disabled	ON
2	CR switching	LF operation	Ignored	OFF
3	Print density	See Table 1		ON
4				OFF
5	Paper selection	Label paper	Thermal paper	OFF
6	Auto-loading	Enabled	Disabled	ON
7	DTR/DSR, XON/XOFF	XON/XOFF	DTR/DSR	OFF
8	Kanji code selection	S-JIS	JIS	OFF

*DS1-7: Enabled only for the serial interface. Disabled for the parallel one.

DS2 (For Serial Interface Only)

No.		Function		ON	OFF	Upon Shipment
1						OFF
2	Baud rate and parity			See Table 2		OFF
3	setting					OFF
4						OFF
Table 1
			Light	Standard	Slitly Dark	Dark
		DS1-3	OFF	ON	OFF	ON
		DS1-4	OFF	OFF	ON	ON
Table 2
		DS2-4	DS2-3	DS2-2	DS2-1	Parity	Baud Rate
		OFF	OFF	OFF	OFF	None	9,600 bps
		OFF	OFF	OFF	ON	None	1,200
		OFF	OFF	ON	OFF	None	2,400
		OFF	OFF	ON	ON	None	4,800
		OFF	ON	OFF	OFF	None	9,600
		OFF	ON	OFF	ON	None	19,200
		OFF	ON	ON	OFF	Odd	1,200
		OFF	ON	ON	ON	Odd	2,400
		ON	OFF	OFF	OFF	Odd	4,800
		ON	OFF	OFF	ON	Odd	9,600
		ON	OFF	ON	OFF	Odd	19,200
		ON	OFF	ON	ON	Even	1,200
		ON	ON	OFF	OFF	Even	2,400
		ON	ON	OFF	ON	Even	4,800
		ON	ON	ON	OFF	Even	9,600
		ON	ON	ON	ON	Even	19,200

32 CITIZEN