ESC c | 5 n |
[Function] | Enabling/Disabling the panel switches |
[Code] | <1B> H <63> H <35> H <n> |
[Range] | 0 £ n £ 255 |
[Outline] | Selecting the LF switch valid/invalid. |
| · "n" is valid only in the lowest bit (n0). |
| · "n" bit means the followings. |
n0
0
1
Condition
LF SW valid.
LF SW invalid.
[Caution] | When the panel switch is disabled with this command, the LF switch is disabled. |
| Therefore, the paper cannot be fed by operating the LF switch. |
[Default] | n = 0 |
[Sample Program]
LPRINT CHR$ (&H1B) ; "c5" ; CHR$ (0) ; ········ When enabling the LF switch
LPRINT CHR$ (&H1B) ; "c5" ; CHR$ (1) ; ········ When disabling the LF switch
ESC d | n |
[Function] | Printing and feeding the paper by n lines |
[Code] | <1B> H <64> H <n> |
[Range] | 0 £ n £ 255 |
[Outline] | Prints data inside the buffer and feeds paper by n lines. |
| · Specified line does not remain. |
| · The beginning of the line is to be considered as the next printing start position. |
[Default] | · The initial value is not defined. |
[Sample Program]
LPRINT "AAAAA"
LPRINT CHR$ (&H1B) ; "d" ; CHR$ (2) ;
LPRINT "AAAAA" ; CHR$ (&HA) ;
END
[Print Results]
65 | CITIZEN |