Citizen CBM-270 user manual ESC n, Esc

CBM-270 User’s Manual

ESC - n

[Function]	Specifying/Canceling underline
[Code]	<1B> H <2D> H <n>
[Range]	0 £ n £ 2
[Outline]	Specifying/canceling an underline.
	· Types of underlines by n value are shown below:
	n	Type
	0	Canceling an underline.
	1	Specifying an underline for 1-dot width
	2	Specifying an underline for 2-dots width

[Caution]	·	An underline is attached to the full character width. It is, however, not
		attached to the part having been skipped by horizontal tab command.
	· An underline is not attached to a 90 °- right-turned characters.
	·	Specification/cancellation with this command is invalid to Kanji.
[See Also]	ESC !, FS -

[Sample Program]

LPRINT CHR$ (&H1B) ; "-" ; CHR$ (0) ;

LPRINT "AAAAA" ;

LPRINT CHR$ (&H1B) ; "-" ; CHR$ (1) ;

LPRINT "AAAAA" ; CHR$ (&HA) ;

END

[Print Results]

ESC 2

[Function]	Specifying 1/6-inch line feed rate
[Code]	<1B> H <32> H
[Outline]	The line feed rate per line is specified by 1/6 inch.
[Sample Program]		[Print Results]

LPRINT "AAAAA" ; CHR$ (&HA) ;

LPRINT CHR$ (&H1B) ; "3" ; CHR$ (0) ;

LPRINT "AAAAA" ; CHR$ (&HA) ;

LPRINT CHR$ (&H1B) ; "3" ; CHR$ (50) ;

LPRINT "AAAAA" ; CHR$ (&HA) ;

LPRINT CHR$ (&H1B) ; "2" ;

LPRINT "AAAAA" ; CHR$ (&HA) ;

LPRINT "AAAAA" ;

LPRINT CHR$ (&H1B) ; "J" ; CHR$ (100) ;

LPRINT "AAAAA" ; CHR$ (&HA) ;

LPRINT "AAAAA" ; CHR$ (&HA) ;

56 CITIZEN