Citizen CBM-270 user manual GS C0

CBM-270 User’s Manual

GS C0	m n
[Function]	Setting the numbering print mode
[Code]	<1D>H<43>H<30>H<m><n>
[Range]	0 £ m £ 5
	0 £ n £ 5
[Outline]	This command sets the numbering (serial number counter) print mode. m
	denotes the number of print columns.
m = 0	Prints the digits indicated by a numeral. In this case, n has no meaning.
m = 1 to 5	Indicates the maximum number of columns to be printed. If a counter value is
	larger than this the number of columns set with this command, the printer will
	print the lower m-digits of the counter value.
	n specifies a printing position within the printing columns.
n = 0	Prints the data right justified. The blank columns are spaced.
n = 1	Prints the data right justified.	The blank columns are filled with "0".
n =2	Prints the data left justified.	The right blank columns are spaced.
[Caution]	If either m or n has a value beyond their ranges, that setting will become invalid.
[See Also]	GS C1, GS C2, GS c, GS C
[Default]	m = 0, n = 0
[Sample Program]
	LPRINT CHR$ (&H1D) ; "C0" ;	* CNT
	LPRINT CHR$ (0) ; CHR$ (0) ;	FOR I=1 TO 5
	GOSUB * CNT	LPRINT CHR$ (&HID) ; "c" ;
	LPRINT CHR$ (&H1D) ; "C0" ;	NEXT I
	LPRINT CHR$ (1) ; CHR$ (0) ;	LPRINT CHR$ (&HA) ;
	GOSUB * CNT	RETURN
	LPRINT CHR$ (&H1D) ; "C0" ;

LPRINT CHR$ (3) ; CHR$ (0) ;

GOSUB * CNT

LPRINT CHR$ (&H1D) ; "C0" ;

LPRINT CHR$ (3) ; CHR$ (1) ;

GOSUB * CNT

LPRINT CHR$ (&H1D) ; "C0" ;

LPRINT CHR$ (3) ; CHR$ (2) ;

GOSUB * CNT

END

[Print Result]

Counts from 1 to 5 at m = 0 and n = 0. Counts from 6 to 10 at m = 1 and n = 0. Counts from 11 to 15 at m = 3 and n = 0. Counts from 16 to 20 at m = 3 and n = 1. Counts from 21 to 25 at m = 3 and n =2.

84 CITIZEN