Citizen CBM-270 user manual Jumper Wire Function, Usa

CBM-270 User’s Manual

5.3Jumper Wire Function

The jumper wires have been set at shipment. The following lists the basic settings at shipment. Check the settings by performing self-printing.

Jumper Wires

No.	Function	Short	Open	Upon
				Shipment
J1				Short
J2	International character	See Table 3		Short
J3				Short
J4	Data bit length	7 bits	8 bits	Open
J5	Unused	-	-	Open
J6	Label detection	Black mark	Label interval	Open
J7	Unused	-	-	Open
J8	Communication error mark	Ignored	"?" printed	Open

*J4: Serial interface only. Disabled for the parallel one.

*J5~J7: Do not change the shipment settings.

Table 3

No.	USA	France	Germany	U.K.	Denmark-I	Sweden	Italy	Japan
J1	Short	Open	Short	Open	Short	Open	Short	Open
J2	Short	Short	Open	Open	Short	Short	Open	Open
J3	Short	Short	Short	Short	Open	Open	Open	Open

CAUTION:

1)Never change the settings of the jumper wires.

2)If you want to change their settings, consult us.

3)Never disassemble the printer body. It could cause trouble, etc.

33 CITIZEN