Citizen CBM-270 user manual Lprint CHR$ 0 CHR$

CBM-270 User’s Manual

GS	C1	n1	n2	n3	n4	n5	n6
[Function]		Setting the numbering counter mode (A)
[Code]		<1D>H<43>H<31>H<n1><n2><n3><n4><n5><n6>
[Range]		0 £ n1, N2, N3, N4, N5, N6 £ 255
[Outline]		This command sets the numbering (serial number counter) mode.
			n1 + n2 ´ 256 (n1 = remainder, n2 = quotient)					: Counter default
			n3 + n4 ´ 256 (n3 = remainder, n4 = quotient)					: Counter final value
			n5					: Counter step value
			n6					: Identical counter print count
			(n1 + n2 ´ 256) < (n3 + n4 ´ 256)					: Count-up system
			(n1 + n2 ´ 256) > (n3 + n4 ´ 256)					: Count-down system
			(n1 + n2 ´ 256) = (n3 + n4 ´ 256) or n5 = 0 or n6 = 0 : Counter stop
[Default]		n1 + n2 ´ 256 = 1
		n3 + n4 ´ 256 = 65535
		n5 = 1
		n6 = 1
[See Also]		GS C0, GS C2, GS c,					GS C ;
[Sample Program]
		LPRINT CHR$ (&H1D) ; "C0" ;					* CNT
		LPRINT CHR$ (3) ; CHR$ (0) ;					FOR I=1 TO 6
		LPRINT CHR$ (&H1D) ; "C1" ;					LPRINT CHR$ (&HID) ; "c" ;
		LPRINT CHR$ (50) ; CHR$ (0) ;					NEXT I
		LPRINT CHR$ (0) ; CHR$ (0) ;					LPRINT CHR$ (&HA) ;
		LPRINT CHR$ (5) ; CHR$ (2) ;					RETURN
		GOSUB * CNT
		LPRINT CHR$ (&H1D) ; "C2" ;
		LPRINT CHR$ (5) ; CHR$ (0) ;
		GOSUB * CNT
		END
[Print Result]							When setting a count-down range = 0 to 50, step
							value = 5, repeat count = 2, and start value = 5 to
							print a counter value.

When setting a count-down range = 0 to 50, step value = 5, repeat count = 1, and start value = 50 to print a counter value. (The repeat count is cleared)

85 CITIZEN