Citizen CBM-270 user manual ESC * m N1 n2 d

CBM-270 User’s Manual

ESC * m	n1 n2 [ d ]		k
[Function]	Specifying the bit image mode
[Code]	<1B> H <2A> H <m> <n1> <n2> [<d>] k
[Range]	m= 0, 1, 32, 33
	0	£ n1 £ 255
	0	£ n2 £ 1
	0	£ d £ 255
	k = n1 + 256 ´ n2		(m = 0, 1)
	k = (n1+ 256 ´ n2) ´ 3		(m = 32, 33)
[Outline]	According to the number of dots specified in n1, n2, specify the bit image of mode n.

·The No. of dots printed is divided by 256, whose quotient is taken as n2 and residualas n1.

·The total no. of dots printed in the bit image is equal to n1 + (256 ´ n2).

·When bit image data have been input in excess of dot position of one line (448 dots) , the excess data are discarded.

·d is bit image data, the bits subject to printing are taken as "1" and those not as "0".

·The bit image modes specified by m are shown as follows:

m	Mode	Vertical Direction		Horizontal Direction
		No. of Dots	Dot Density	Dot Density	Max. No. of Dots
0	8-dot single density	8	67 DPI	101 DPI	192
1	8-dot double density	8	67 DPI	203 DPI	384
32	24-dots single density	24	203 DPI	101 DPI	192
33	24-dots double density	24	203 DPI	203 DPI	384

[Caution] ·When the values set in m (Bit image mode) are out of the above range, the data following after n1 is processed as normal printing data.

·After completion of bit image printing, printer returns to normal data processing mode.

[Example]

54 CITIZEN