Cub Cadet EW-7416APN manual Wmm

Page 33

 

your wireless access point (set the option to

 

‘Disable’), so only people those who know the

 

ESSID of your wireless access point can get

 

connected.

WMM

WMM (Wi-Fi Multimedia) technology, which can

 

improve the performance of certain network

 

applications, like audio/video streaming, network

 

telephony (VoIP), and others. When you enable

 

WMM function, the access point will define the

 

priority of different kinds of data, to give higher

 

priority to applications which require instant

 

responding. Therefore you can improve the

 

performance of such network applications.

VLAN ID

If your network uses VLANs, you can assign the

(0:Untagged)

SSID to a VLAN on your network. Client devices

 

that associate using the SSID are grouped into this

 

VLAN. The VLAN ID range is from 1 to 4094. The

 

VLAN ID is 0 by default, it means that disable the

 

VLAN function for the ESSID.

2-4-2 Station-Infrastructure

In this mode, you can connect the access point to Ethernet device such us TV and Game player to enable the Ethernet device be a wireless station and join to a wireless network through an access point or AP router.

Here are descriptions of every setup item:

26

Image 33
Contents Page Copyright Federal Communication Commission Interference Statement Page TTE Compliance Statement T a L O G IP Address of the Wireless Access Point Chapter I Product Information Page System Requirements Page Front Panel Back Panel Chapter II System and Network Setup Connecting to wireless access point by web browser Page Page Page Page Page Windows Vista IP address setup Page Page Page Page Essid Bssid Access point mode, allows wireless clients to AP at the same time. It can use Station function to That Essid is Case Sensitive Up to four SSIDs can be set. If you want to Please Note That Essid is Case WMM Wlan MAC Page Display the Ssid name of the access point Band Only wireless clients using the wireless band Band Clients using 802.11b and 802.11g band will be Band Main Essid Page Main Ssid Page Page Her. see -7 for detailed information if Displayed here. If you don’t enable security Is, default value is Rate automatically, it’s not necessary to change Power to 100%. This will enhance security Page Page Page Page If you don’t know which one you should use Page Page WPA Radius Page Page Input username, password, re-type password Page Page It blank, however, it’s recommended to use this Page Page Page Page Page Chapter III Advanced Configuration Page Page Chapter IV Appendix Page Please check the status of A/C power Glossary Page TCP FTP Smtp POP3