Cub Cadet EW-7416APN manual WPA Radius

Page 59

2-7-4 WPA RADIUS

WPA Radius is the combination of WPA encryption method and RADIUS user authentication. If you have a RADIUS authentication server, you can check the identify of every wireless client by user database.

When you select ‘WPA RADIUS’ as encryption type, the following messages will be displayed:

Here are descriptions of every setup item:

WPA Unicast

You can select WPA encryption type here. AES is

Cipher Suite

safer than TKIP, but not every wireless client

 

supports it. Please refer to the specification of your

 

wireless client to decide which encryption type you

 

should use.

Use internal MD5

Uses built-in RADIUS Server (refer to Section 2-8)

RADIUS Server

instead of external RADIUS server. If you check

 

this box, the value in following three fields will be

 

ignored.

RADIUS Server IP

Please input the IP address of RADIUS

address

authentication server here.

RADIUS Server

Please input the port number of RADIUS

Port

authentication server here. Default value is 1812.

RADIUS Server

Please input the password of RADIUS

Password

authentication server here.

After you finish with setting, please click ‘Apply’, and the following message will be displayed:

52

Page 58 Page 60
Image 59
Page 58 Page 60
Contents Page Copyright Federal Communication Commission Interference Statement Page TTE Compliance Statement T a L O G IP Address of the Wireless Access Point Chapter I Product Information Page System Requirements Page Front Panel Back Panel Chapter II System and Network Setup Connecting to wireless access point by web browser Page Page Page Page Page Windows Vista IP address setup Page Page Page Page Essid Bssid Access point mode, allows wireless clients to AP at the same time. It can use Station function to That Essid is Case Sensitive Up to four SSIDs can be set. If you want to Please Note That Essid is Case WMM Wlan MAC Page Display the Ssid name of the access point Band Only wireless clients using the wireless band Band Clients using 802.11b and 802.11g band will be Band Main Essid Page Main Ssid Page Page Her. see -7 for detailed information if Displayed here. If you don’t enable security Is, default value is Rate automatically, it’s not necessary to change Power to 100%. This will enhance security Page Page Page Page If you don’t know which one you should use Page Page WPA Radius Page Page Input username, password, re-type password Page Page It blank, however, it’s recommended to use this Page Page Page Page Page Chapter III Advanced Configuration Page Page Chapter IV Appendix Page Please check the status of A/C power Glossary Page TCP FTP Smtp POP3
Top Page Image Contents