Cub Cadet EW-7416APN manual Please check the status of A/C power

Page 76

 

please check the status of A/C power

 

adapter, and make sure it’s correctly

 

powered.

I can’t locate my

a. ‘Broadcast ESSID’ set to off?

access point by my

b. Is Antenna properly installed and secured?

wireless client

c. Are you too far from your access point? Try

 

to get closer.

 

d. Please remember that you have to input

 

ESSID on your wireless client manually, if

 

ESSID broadcast is disabled.

File download is very

a. Try to reset the access point and see if it’s

slow or breaks

better after that.

frequently

b. Try to know what computers do on your

 

local network. If someone’s transferring big

 

files, other people will think Internet is

 

really slow.

 

c. Change channel number and see if this

 

works.

I can’t log onto web

a. Make sure you’re connecting to the correct

management interface:

IP address of the access point!

password is wrong

b. Password is case-sensitive. Make sure the

 

‘Caps Lock’ light is not illuminated.

 

c. If you really forget the password, do a hard

 

reset.

Access point become

a. This is not a malfunction, if you can keep

hot

your hand on the access point’s case.

 

b. If you smell something wrong or see the

 

smoke coming out from access point or A/C

 

power adapter, please disconnect the access

 

point and A/C power adapter from utility

 

power (make sure it’s safe before you’re

 

doing this!), and call your dealer of

 

purchase for help.

69

Image 76
Contents Page Copyright Federal Communication Commission Interference Statement Page TTE Compliance Statement T a L O G IP Address of the Wireless Access Point Chapter I Product Information Page System Requirements Page Front Panel Back Panel Chapter II System and Network Setup Connecting to wireless access point by web browser Page Page Page Page Page Windows Vista IP address setup Page Page Page Page Essid Bssid Access point mode, allows wireless clients to AP at the same time. It can use Station function to That Essid is Case Sensitive Up to four SSIDs can be set. If you want to Please Note That Essid is Case WMM Wlan MAC Page Display the Ssid name of the access point Band Only wireless clients using the wireless band Band Clients using 802.11b and 802.11g band will be Band Main Essid Page Main Ssid Page Page Her. see -7 for detailed information if Displayed here. If you don’t enable security Is, default value is Rate automatically, it’s not necessary to change Power to 100%. This will enhance security Page Page Page Page If you don’t know which one you should use Page Page WPA Radius Page Page Input username, password, re-type password Page Page It blank, however, it’s recommended to use this Page Page Page Page Page Chapter III Advanced Configuration Page Page Chapter IV Appendix Page Please check the status of A/C power Glossary Page TCP FTP Smtp POP3