Cub Cadet EW-7416APN manual Front Panel

Page 12

1-5 Familiar with your new wireless access point

Front Panel

	LED Name	Light Status	Description
	PWR	On	The access point is switched on and correctly
	PWR		powered.
			powered.

		On	Wireless WPS mode is enabled.
	WLAN	Off	Wireless network is switched off.
	WLAN	Flashing	Wireless LAN activity (transferring or receiving
		Flashing	Wireless LAN activity (transferring or receiving
			data).

		On	LAN port is connected
	LAN	Off	LAN port is not connected
		Flashing	LAN activity (transferring or receiving data)

5

Image 12

Contents Page Copyright Federal Communication Commission Interference Statement Page TTE Compliance Statement T a L O G IP Address of the Wireless Access Point Chapter I Product Information Page System Requirements Page Front Panel Back Panel Chapter II System and Network Setup Connecting to wireless access point by web browser Page Page Page Page Page Windows Vista IP address setup Page Page Page Page Essid Bssid Access point mode, allows wireless clients to AP at the same time. It can use Station function to That Essid is Case Sensitive Up to four SSIDs can be set. If you want to Please Note That Essid is Case WMM Wlan MAC Page Display the Ssid name of the access point Band Only wireless clients using the wireless band Band Clients using 802.11b and 802.11g band will be Band Main Essid Page Main Ssid Page Page Her. see -7 for detailed information if Displayed here. If you don’t enable security Is, default value is Rate automatically, it’s not necessary to change Power to 100%. This will enhance security Page Page Page Page If you don’t know which one you should use Page Page WPA Radius Page Page Input username, password, re-type password Page Page It blank, however, it’s recommended to use this Page Page Page Page Page Chapter III Advanced Configuration Page Page Chapter IV Appendix Page Please check the status of A/C power Glossary Page TCP FTP Smtp POP3