Band | Please select the wireless band you wish to use. By |
| selecting different band setting, you’ll be able to |
| allow or deny the wireless client of a certain band. |
| If you select 2.4GHz (B), 2.4GHz (N), or 2.4GHz |
| (G), only wireless clients using the wireless band |
| you select (802.11b, 802.11 |
| will be able to connect to this access point. |
| If you select 2.4GHz (B+G), then only wireless |
| clients using 802.11b and 802.11g band will be |
| able to connect to this access point. |
| If you want to allow 802.11b, 802.11g, and 802.11 |
| |
| select 2.4GHz (B+G+N). |
Main ESSID | Please input the ESSID (the name used to identify |
| this wireless access point) here. You can input up |
| to 32 alphanumerical characters. PLEASE NOTE |
| THAT ESSID IS CASE SENSITIVE. |
Site Survey | When you use this access point as a wireless |
| station for Ethernet network device to have |
| wireless capability, you have to associate it with a |
| working access point. Click ‘Select Site Survey’ |
| button, then a “Wireless Site Survey Table” will |
| pop up. It will list all available access points near |
| by. You can select one access point in the table and |
| it will join wireless LAN through this access point. |
| Please go to Section |
| about the ‘Wireless Site Survey Table’. |
WLAN MAC | For some applications, you may need to designate |
| a specific MAC address for the access point. |
| Please enter the MAC address here. If you are |
| connecting the access point to a computer, you can |
| simply press ‘Clone Mac address’ button to fill the |
| MAC address field with the MAC address of your |
| computer. |
| 27 |