Matsushita CF-Y5LWVYZ 1 2 Removing the Touch Pad / LCD Knob, Disk Cover Lock Spring Top Case

9.2.6.Removing the Touch Pad / LCD Knob

Preparation : perform the section 9.2.1., 9.2.3. and 9.2.4. first.

1.The pad top ring fixed to the pad cover by the both sides tape is removed, and remove the screw (P). Screw (P) : DXHM0057ZA (N5)

Pad Button

Touch Pad

Pad Ring Top

Screw (P)

Tape

Pad Cover

Top Case

2.Peel off the pad sheet.

The LCD knob is lifted from a top case, and remov- ing LCD knob is removed from the knob side in the LCD latch spring.

Pad WP Sheet

LCD Knob

LCD Latch Spring

Top Case

Note:

The pad sheet cannot be recycled. Please use new parts.

9.2.7.Removing the Solenoid / Disc Cover Lock

Preparation : perform the section 9.2.1., 9.2.3. and 9.2.4. first.

1.Remove the solenoid line hold sheet and cable fixed sheet.

Solenoid line hold sheet : DFHR3D20ZA (K122)

2.Remove the 1 screw (Q) and the solenoid from the top case.

Screw (Q) : DXHM0056ZA (N4)

Top Case

Screw (Q)

Solenoid Line Hold Sheet

Cable Fixed Sheet

Note:

The each cable fixed tapes cannot be recycled. Please use new parts.

3.Remove the disc cover lock spring, and slide the disc cover lock and then remove.

Disk Cover Lock Spring

Disk Cover Lock

Top Case

Note:

When expanding or transforming, the disk cover knob spring cannot be recycled.

28