Matsushita CF-Y5LWVYZ 1 2 Removing the Modem, Preparation perform the .2.1 9.2.11. first

9.2.15. Removing the Wireless LAN Module	9.2.17. Removing the Card Bus Ejector
Preparation : perform the section 9.2.1., 9.2.3.,	Preparation : perform the section 9.2.1., 9.2.3.,
9.2.4. and 9.2.11. first.	9.2.4. and 9.2.11. first.
1. Remove the 2 screws (X).	1. Remove the 1 screw (Z) from connection side of
Screw (X) : DXQT2+D25FNL (N6)	wireless LAN.
2. Wireless LAN module is floated in the connector	Screw (Z) : DXQT2+D25FNL (N6)
fulcrum and removed.
Screw (X)	Wireless LAN Module
Wireless LAN Module
	Screw (Z)

2

1

9.2.16. Removing the MODEM

Preparation : perform the section 9.2.1., 9.2.3.,

9.2.4.and 9.2.11. first.

1.Remove the 2 screws (Y). Screw (Y) : DXQT2+D25FNL (N6)

2.MODEM will be removed from connector (CN17) to the vertical direction.

Screw (Y)

MODEM

MODEM Cable

Connector

2.Return it on the revers to the card bus ejector side.

3.The minus small driver is inserted in connector (CN13) and the card bus ejector intuition combina- tion parts, 2 places of hooks (E). And then remove the card bus ejector.

Card Bus Ejector

Hook (E)

Main Board

Note :

Be careful not to transform the card bus ejector when you remove the hook.

32